Highest 24/7 overclocks POST HERE

[rollaballinc]

Post you high over clocks and your cooling method with your high and low temps

4.0Ghz i7 930
Low Temps : mid 40's
High Temps : 70
Cooler/Heatsink : Corsair Hydro 50

 

[henydiah]

in the rule just write this my Oc :

4.04ghz Thuban 1055T
idle temp 32C
full load temp 52C (under test)
Cooler : PC cooler (you can't found in internet)

(little high from you 0.04) and more cool

 

[Deleted member 217926]

Last 3. Antec 1200 with 7 x 120mm and 1 x 200 mm case fans.


E6600 2.4ghz to 3.4ghz with a ZeroTherm Nirvana NV 120. With Actic Silver Ceramique thermal compound.
Idled in the 20s C to 60C under load

E8400 3.0ghz to 4.050ghz with the same NV120.Same Ceramique thermal compound.
Idled in the 20s C to high 50s under load.

i7 2600K 3.4ghz to 4.5ghz with Hyperthreading enabled. Scythe Mugen 2 Rev. B with IC Diamond 24 thermal compound.
Idles in the high 20s to low 60s under load.


Load meaning Prime 95. All still run at those clocks 24/7. I just do not own the first 2 anymore but a buddy of mine does.

 

[spentshells]

q6600 @ 3.6 74C load after 2 hrs pime (i know and I do not care)
using the terrible goo that came with the CM 212

forgot to mention 78 F in the house


Update Q6600 @ 3.6 70C at load overnight MX-4 72 Ambient

 

[Leaps-from-Shadows]

Intel® Second Generation Core™ i5 2500K @ 4.8GHz @ 1.504v
Low 70sºC under IntelBurnTest Maximum setting (Prime95 runs cooler on my machine)
Scythe Rasetsu cooler

Will be getting some sort of liquid cooling when I do the mainboard swap for the fixed board.

 

[jsc]

GA-EP45-UD3P | Q9550 OC'd to 3.6 GHz (425 MHz X 8.5) C3 stepping , load temps 58 -61 C, TRUE/Scythe SFlex SF-21F
GA-EP45-UD3L | Q6600 OC'd to 3.6 GHz (400 MHz X 9), load temps 61 - 66 C, Xig Dark Knight
GA-EP35-DS3P | E7500 OC'd to 4.11 GHz (373 MHz X 11) load temps <60 C, Xig Dark Knight, "junk system" built out of leftovers
All are 24 hour, Prime95 stable.

 

[christop]

I7-930- @3.85 water cooled
idle 4 cores 29 27 31 25
full load 4 cores 50 48 52 45
I could go higher with my oc but don't see a reason at this point.

 

[blacksheep101]

i 920 @ 4ghz, 81c load under gaming
notua u12 or whatever it is

....90c under load, *** it, it is mounted correctly.

 

[wolfram23]

For daily usage I'm at 177bclk with turbo on, so 3.7ghz -> 4.2ghz (i5 750).

Idle temps are around 38-40 or so, full stress test load is around 72-73C but never more than 66 or so under normal use (that happens when encoding video).

blacksheep101: That doesn't seem right unless your ambient temps are in the 30s. Did you manually OC and bring the voltages down as much as possible?

 

[rollaballinc]

it seems like you i5 and non 1366 i7 guys are able to get higher over clocks then i7 1366 people ...

 

[wolfram23]

it seems like you i5 and non 1366 i7 guys are able to get higher over clocks then i7 1366 people ...

Sandy Bridge overclocks like nothing seen before, so yeah the i5 2500ks are achieving mind blowing speeds.

 

[Snowbum]

Idles mid 30s, realtemp load is 72-75ish
H50, Arctic mx-3, and push pull mod to cool it.

 

[PudgyChicken]

i7 980X 4.7GHz (only for a few weeks), temps were around mid 40s idle, never pushed it to full load cause i could only assume what would happen

current is 4.27GHz, temps are 30-35 idle, 50ish full load (prime95)

using Corsair Hydro H50 in push pull with 2x 1500RPM Apevia blue LED fans

 

[Snowbum]

What case? I just checked my temps and i idle at 30C and max out at 50C in BC2

Its a full tower, thermaltake spedo. I've got a fan controller on the front with 6 120mm fans wired to it. I usually only run a single fan on the radiator and the two 120mm in the rear due to the noise. But, if im gaming or have handbrake running I crank em all up.

 

[Hard Line]

i7 930 @ 4.2ghz 1.25v
idle 31C ibt load 63C ( prime) gaming about 50-53C
Noctua D-14 push/ pull/ push

 

[rollaballinc]

Snow Bum whats a push pull mod? Fans ?

 

[Snowbum]

Snow Bum whats a push pull mod? Fans ?

Exactly. Fans are the bread, radiator is the meat. 1 fan pushes through the rad and the other pulls.

 

[rollaballinc]

Best answer selected by rollaballinc.

 

[dontknownotsure]

i7 2600k 4.5Ghz @ 1.35v I do long overnight renders so that substitutes stress tests lol.

mugen 2, highest 75

 

[Deleted member 217926]

2 year old thread with a best answer revived. Needs to be closed.

 

[ericjohn004]

Someones gotta represent the 3570k in here.

i5 3570k@4.6Ghz w/1.385vcore w/98c MAX temp. on hottest core in IBT 127.5Gflops w/85c MAX temp. on hottest core in Prime95

7.9 second SuperPI 1M Score, 9600 Passmark8 CPU Mark, 9400 3DMark11 Physics/9000P Total 3DMark11 score with 660Ti OCed, 7.70 Cinebench 11.5, 1.97 Single Core Cinebench 11.5

I think that's enough info on my 3570k

 

[Deleted member 217926]

There are no Ivy bridge CPUs because the thread is 2 years old! As I already pointed out above. I asked the mods to close this.

 

[ericjohn004]

There are no Ivy bridge CPUs because the thread is 2 years old! As I already pointed out above. I asked the mods to close this.

Dude your like, trippin, over an old thread. Who the hell cares? Find something else to do with your life. I'm worried about you.

 

[Deleted member 217926]

There are no Ivy bridge CPUs because the thread is 2 years old! As I already pointed out above. I asked the mods to close this.

Dude your like, trippin, over an old thread. Who the hell cares? Find something else to do with your life. I'm worried about you.

Wait until you have been here a few years and you will feel the same way. It's great fun to get sometimes several messages a day from threads you posted in back in 2009. As this one had a best answer it should have been closed 2 years ago. Besides necroing a thread is at least a violation of etiquette if not TOS.