G31-m7 te overclocking e6600

[jesterordie]

Hi totally new to over clocking and was wondering if i can overclock my e6600 on a G31-M7 TE. Maybe someone could suggest somewhere to look up this over clock if its been done already on this setup, as i really will need to be led by the hand on what to do. any advice would be welcome

 

[jsc]

This should be your first stop.
Core2 Overclocking Guide
http://www.tomshardware.co.uk/forum/259899-11-core-overclocking-guide

Next stop should be a guide for your particular motherboard. Google is your friend.

Go through the guides. Then take your core voltage off Auto and set your memory voltage to factory recommended values. Change the System Memory Multiplier (or whatever your BIOS calls it) from AUTO to 2.00, 2.00B, or 2.00D - whichever you need to set the Memory Frequency to twice the FSB. Then when you increase the FSB, the memory clock will rise in in proportion with it. At an FSB of 266 MHz, your memory clock should be at 533 MHz.

Download CPU-Z to check your FSB:RAM ratio. It should be a 1:1 ratio.

For some comment about overclocking G31/G41 motherboards:
http://www.tomshardware.co.uk/forum/255107-11-biostar-overclock-pentium-e5400