what is the 2600k max safe temps and max safe voltages if im overclocking? intel and other forums have been kinda all around saying anywhere from 72 to 80C and idk what max safe voltages are
What kind of OC do you think i could reach with the cooler master 212 with dual fan and the antec 1200 V3 case. I know its the very case you run as well and with the extra two fans installed ill have 3 fans cooling my CPU
I'm running both the fans. I'm running them exhaust though, which was told is the second best option, I just couldn't get my head around dumping the heat back into the case.
what is the advantage of changing the FSB when you OC the 2600k. i heard you only change the multiplier. and what memory control does the 2600k support i heard its only 1066 and 1333
ok how do i find out its rated speed and timings. its DDR3 1600 and the timing are 8-8-8-24. are you talking about relaxing timings and what its rated to?
well what memory control does the 2600k provide. On intel site its only 1066 and 1333
If your motherboard and memory are good enough, the CPU supports memory ratios up to DDR3-2133 in 266MHz intervals. Some boards have a DDR3-2400 option, but I've never seen a CPU's memory controller actually function at that ratio.
Nvm, I just overclocked my processor to 4.3 ghz and the temps stayed the same ...
The heatsink just seems to not work very well at idle, but 4.3 ghz running for one hour with a max temp of 55C I can live with.
If the H70 is anything like the H50 and the pump plugs into the CPU fan controller on your MB you need to set it to 100% in bios, the pump is not desgined to run at anything less, that could be your temp issues right there.