I started with 2 sticks of memory running at 10.66mhz, then added a third stick expecting the freq to automaticallly change to 13.33mhz, but it remains at 10.66mhz. System runs stable and cool, but somehow I feel the itch to help my machine "be all it can be" if you know what I mean. I'm a bit 'noobish' in the overclocking arena and would very much appreciate some wise advise.
Yes, it looks like I will have to manually set the freqs and voltages, but was wondering where I can find a chart or some such to tell what is relevant and needs to be adjusted. I know that I can probably play around with it as long as I can reset cmos but am still a little edgy to dive in without knowing how deep the water might be. The motherboard 'manual' doesn't help at all.
and yes, the memory is identical corsair 1333, 4gigs per stick. (Corsair XMS3 4 GB 1333MHz PC3-10666 240-pin DDR3)