Flashed bios GA-K8NF-9 drivers wont load

[cornielc]

I was able to successfully flash the BIOS on my Gigabyte Motherboard (GA-K8NF-9) from version F2 to F12. My system boots up and starts fine, but none of the drivers for IDE Controller or ATA Device controllers load. I have gone on the Gigabyte web site to try to manually load these drivers, but that errors out. Can someone please help me?

 

[johnnyq1233]

Please give system specs and the os you're running..
Also, if you could did you do a fresh install after the bios update?

 

[cornielc]

I did not do a fresh install after the BIOS update.

System Specs:
AMD Athlon (tm) 64 Processor 3200+ @2.0GHz, Gigabyte GA-K8NF-9 motherboard, 2GB OCZ High Performance DDR1, Seagate Barracuda 120 GB 16MB ATA HDD, Windows Vista Ultimate Service Pack 2, NVIDIA GeForce FX5200

 

[cornielc]

Please give system specs and the os you're running..
Also, if you could did you do a fresh install after the bios update?

I did not do a fresh install after the BIOS update.

System Specs:
AMD Athlon (tm) 64 Processor 3200+ @2.0GHz, Gigabyte GA-K8NF-9 motherboard, 2GB OCZ High Performance DDR1, Seagate Barracuda 120 GB 16MB ATA HDD, Windows Vista Ultimate Service Pack 2, NVIDIA GeForce FX5200

 

[badge]

You must be loading Windows XP drivers on a Vista OS. Socket 939 was released well before Vista. There is a not a single Vista driver listed for your MB.

http://www.gigabyte.us/Support/Motherboard/Driver_Model.aspx?ProductID=2206

I use these Vista 32 NF4 chipset drivers for my 939 NF4 MBs.

http://www.nvidia.com/object/nforce_vista_15.23.html