Hallo All,
My configuration: LaCie-2big 2TB in Safe Mode.
One day I suddenly heard a noise of the disk and the front LED changed colour to red
and so did one (left) of the rear LEDs. Closing drive with the web administration
page has never finished. After an hour or so I switched it off manually removing
power supply plug (power switch didn't work). After power down and power on
again the front LED is off, right disks LED is blue and left - previously red - is blinking
blue and somtimes one can hear disk's heads are moving. After even 24 hours nothing
has changed. The situation is identical when left defective drive is removed or even both
drives are removed. It looks like the appliance is living its own life. There is no contact
with it by web and Network Assistance. It doesnt answer on pings. Resetting procedure
doesn't work. Do you need any suggestion what it means and wahat to do?
Any ideas would be appreciated.
Thanks
My configuration: LaCie-2big 2TB in Safe Mode.
One day I suddenly heard a noise of the disk and the front LED changed colour to red
and so did one (left) of the rear LEDs. Closing drive with the web administration
page has never finished. After an hour or so I switched it off manually removing
power supply plug (power switch didn't work). After power down and power on
again the front LED is off, right disks LED is blue and left - previously red - is blinking
blue and somtimes one can hear disk's heads are moving. After even 24 hours nothing
has changed. The situation is identical when left defective drive is removed or even both
drives are removed. It looks like the appliance is living its own life. There is no contact
with it by web and Network Assistance. It doesnt answer on pings. Resetting procedure
doesn't work. Do you need any suggestion what it means and wahat to do?
Any ideas would be appreciated.
Thanks