I7 930 oc

[sgs2008]

Hi Im pretty new to OCing so I wanted to ask if my set up at the moment is considered to be alright. I have my core i7 set to 3.8 ghz. Multiplier at 22, bclk at 173. My qpi/vtt is 1.32 and vcore at 1.325 all other voltages are on auto. Haven't run any stability tests on this yet but I got an error on the same set up with a vcore of 1.317 after 3h50 min of OCCT.

 

[sgs2008]

After testing in OCCT after increasing the Vcore I got an error after 38 minutes so it seems to be worse now. Anyone have an idea whats going on ?

 

[gofasterstripes]

heat soak?

 

[sgs2008]

whats that? my temps are pretty good.35-39 at idle nothing above 68 at load

 

[henydiah]

try keep at multiplier at X20 and increase bclk at 190, with increase vdim
remember Increase Vdim for good performance 1.65v don't over.

to shorten the time usually using IBT, test 20 sets a maximum on the Ram. only approximately 15 minutes and if it happens here BSOD, look at the BSOD message. if no such file error message (error) but the system remains the way you need to fix the settings in the RAM

 

[sgs2008]

I had tried it before at 21 x and a bclk at 183 and it could boot into windows so I dont really want to increase the bclk anymore. Ill try testing out the ram then.