Sign in with
Sign up | Sign in
Your question
Closed

1100t voltage question?

Last response: in Overclocking
Share
May 14, 2011 10:30:04 PM

Overclocked my 1100t black edition but wonder can i run 24/7 with these voltages. Only 100millivolts over normal.
Or are there suggestions to lower my CPU voltage by changing other values.
:bounce: 


Idle temp 35c____ load 90-100% for one hour 48-50c water cooled




--------[ EVEREST Ultimate Edition ]------------------------------------------------------------------------------------

Version EVEREST v5.50.2100
Benchmark Module 2.5.292.0
Homepage http://www.lavalys.com/
Report Type Quick Report
Computer PROPHET-PC
Generator Administrator
Operating System Microsoft Windows 7 Professional 6.1.7601
Date 2010-08-14
Time 06:27


--------[ Overclock ]---------------------------------------------------------------------------------------------------

CPU Properties:
CPU Type HexaCore AMD Phenom II X6 Black Edition 1100T
CPU Alias Thuban
CPU Stepping PH-E0
Engineering Sample No
CPUID CPU Name AMD Phenom(tm) II X6 1100T Processor
CPUID Revision 00100FA0h
CPU VID 1.4625 V
North Bridge VID 1.3000 V

CPU Speed:
CPU Clock 4062.5 MHz
CPU Multiplier 20x
CPU FSB 203.1 MHz (original: 200 MHz)
HyperTransport Clock 2031.2 MHz
North Bridge Clock 2031.2 MHz
Memory Bus 812.5 MHz
DRAM:FSB Ratio 24:6

CPU Cache:
L1 Code Cache 64 KB per core
L1 Data Cache 64 KB per core
L2 Cache 512 KB per core (On-Die, ECC, Full-Speed)
L3 Cache 6 MB (On-Die, ECC, NB-Speed)

Motherboard Properties:
Motherboard ID 64-0100-000001-00101111-081210-ATHLON64$A7612200_A7612NMS V1.4 081210
Motherboard Name MSI NF980-G65 (MS-7612) (2 PCI, 2 PCI-E x1, 3 PCI-E x16, 4 DDR3 DIMM, Audio, Video, Gigabit LAN)

Chipset Properties:
Motherboard Chipset nVIDIA nForce 980a SLI, AMD K10
Memory Timings 9-9-9-29 (CL-RCD-RP-RAS)
Command Rate (CR) 1T
DIMM1: Corsair CMZ8GX3M2A1866C9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (7-7-7-19 @ 518 MHz) (6-6-6-16 @ 444 MHz)
DIMM2: Corsair CMZ8GX3M2A1866C9 4 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (7-7-7-19 @ 518 MHz) (6-6-6-16 @ 444 MHz)

BIOS Properties:
System BIOS Date 08/12/10
Video BIOS Date 11/29/10
DMI BIOS Version V1.4

More about : 1100t voltage question

a c 159 à CPUs
a c 288 K Overclocking
May 15, 2011 12:48:13 AM

If it's 100% stable you can run it, your temps looks good. Why are you changing the FSB? your CPU is BE, so, you don't need do that.
Score
0
May 15, 2011 1:31:28 AM

Nice bit of info , i had no idea.......thanks for the assistance
Score
0
Related resources
Can't find your answer ? Ask !

Best solution

a b à CPUs
a b K Overclocking
May 15, 2011 4:51:17 PM

This should help in your quest to OC .....

http://www.tomshardware.com/forum/258573-29-black-editi...
Share
May 15, 2011 6:48:23 PM

Thanks
Score
0
May 16, 2011 12:43:29 AM

saint19 said:
If it's 100% stable you can run it, your temps looks good. Why are you changing the FSB? your CPU is BE, so, you don't need do that.


Not necessarily, my old Phenom II X2 555 was more stable using FSB than the multiplier.

http://valid.canardpc.com/show_oc.php?id=1563268

To OP, 1.4625V is nowhere near high. Once you pass 1.55V i would be more cautious.

Also, what kind of WC loop do you have? those temps are pretty high for being water cooled. My 1055T 3.8GHz @ 1.45V and my little tranquillo cooler never passes 48C.
Score
0
May 16, 2011 2:09:52 AM

I have two loops one for video and one for the CPU..Try hot CPU Tester for a hour or so you may see higher temps....CPU pump thermaltake...GPU pump swiftec.

2 GPU's 570's (SLI) OC 850 IDLE 33c After 2 hours Heaven tessellation benchmark 54-59c

Also CPU VID and CPU Voltage are both in the bios and not the same, CPU voltage per CPU-Z IS 1.501V

Thanks for the response
Score
0
May 16, 2011 4:56:20 AM

Dont want to offend anyone...not comfortable with the best answer method and I appreciate all the helpful answers...........:-)
Score
0
May 17, 2011 8:30:01 PM

Best answer selected by BIG DAD.
Score
0
a c 159 à CPUs
a c 288 K Overclocking
May 17, 2011 9:09:50 PM

This topic has been closed by Saint19
Score
0
!