WindowsXP Start Up

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

Hello,

May have posted my question to the wrong area before or
now, but this is a puzzle and I could use an expert.

Four failed installs of a Creative Audigy 2ZS sound card
has really screwed up my OS or Registry or both.

XP will ONLY load fully if I run ChkDsk c: /F(ix) on each
startup. Otherwise the boot process gets to the black
screen with the XP colored flag logo and then simply
starts rebooting all over again. BUT, it doesn't just
reboot, it acts as if the power was turned off and then
goes to a check disk. THEN it loads fully. Weird????

In my start up list is an entry I'm not familiar with nor
have I seen it on any other system that I use at work:

KERNEL/FAULT/CHeck - %systemroot%\System32\dumprep 0 -k -
HKEY_LM\RUN

What is this and why is it in my start up list? Hope
someone can shed some light. Thanks.

DeeAitch

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

dumprep 0 -k

KernalFaultCheck:
%systemroot%\\system32\\dumprep 0 -k

Dumprep.exe = Windows Error Reporting Dump Reporting Tool

You can disable this.
Right click My Computer | Properties | Advanced tab | Under Startup and
Recovery |
Settings button | Under System Failure | UNCheck: ? Write an event to the
system log | Under Write debugging information | Select (None) | OK | Apply|
OK

? Write an event to the system log = dumprep0-k

--
Hope this helps. Let us know.
Wes

In news:2198c01c45c60$7bab5ba0$a601280a@phx.gbl,
DeeAitch <anonymous@discussions.microsoft.com> hunted and pecked:
> Hello,
>
> May have posted my question to the wrong area before or
> now, but this is a puzzle and I could use an expert.
>
> Four failed installs of a Creative Audigy 2ZS sound card
> has really screwed up my OS or Registry or both.
>
> XP will ONLY load fully if I run ChkDsk c: /F(ix) on each
> startup. Otherwise the boot process gets to the black
> screen with the XP colored flag logo and then simply
> starts rebooting all over again. BUT, it doesn't just
> reboot, it acts as if the power was turned off and then
> goes to a check disk. THEN it loads fully. Weird????
>
> In my start up list is an entry I'm not familiar with nor
> have I seen it on any other system that I use at work:
>
> KERNEL/FAULT/CHeck - %systemroot%\System32\dumprep 0 -k -
> HKEY_LM\RUN
>
> What is this and why is it in my start up list? Hope
> someone can shed some light. Thanks.
>
> DeeAitch

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

dumprep 0 -k

KernalFaultCheck:
%systemroot%\\system32\\dumprep 0 -k

Dumprep.exe = Windows Error Reporting Dump Reporting Tool

You can disable this.
Right click My Computer | Properties | Advanced tab | Under Startup and
Recovery |
Settings button | Under System Failure | UNCheck: ? Write an event to the
system log | Under Write debugging information | Select (None) | OK | Apply|
OK

? Write an event to the system log = dumprep0-k

--
Hope this helps. Let us know.
Wes

In news:2198c01c45c60$7bab5ba0$a601280a@phx.gbl,
DeeAitch <anonymous@discussions.microsoft.com> hunted and pecked:
> Hello,
>
> May have posted my question to the wrong area before or
> now, but this is a puzzle and I could use an expert.
>
> Four failed installs of a Creative Audigy 2ZS sound card
> has really screwed up my OS or Registry or both.
>
> XP will ONLY load fully if I run ChkDsk c: /F(ix) on each
> startup. Otherwise the boot process gets to the black
> screen with the XP colored flag logo and then simply
> starts rebooting all over again. BUT, it doesn't just
> reboot, it acts as if the power was turned off and then
> goes to a check disk. THEN it loads fully. Weird????
>
> In my start up list is an entry I'm not familiar with nor
> have I seen it on any other system that I use at work:
>
> KERNEL/FAULT/CHeck - %systemroot%\System32\dumprep 0 -k -
> HKEY_LM\RUN
>
> What is this and why is it in my start up list? Hope
> someone can shed some light. Thanks.
>
> DeeAitch

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

Thanks Wes,

I have tried the settings you have mentioned and I'll let
you know if it improves the weird boot up process I'm
experiencing with chkdsk being necessary to load the OS.

I have posted this in a slightly different form in
another forum which I see that you respond to. Thanks
again.

DeeAitch
>-----Original Message-----
>dumprep 0 -k
>
>KernalFaultCheck:
>%systemroot%\\system32\\dumprep 0 -k
>
>Dumprep.exe = Windows Error Reporting Dump Reporting Tool
>
>You can disable this.
>Right click My Computer | Properties | Advanced tab |
Under Startup and
>Recovery |
>Settings button | Under System Failure | UNCheck: 
Write an event to the
>system log | Under Write debugging information | Select
(None) | OK | Apply|
>OK
>
> Write an event to the system log = dumprep0-k
>
>--
>Hope this helps. Let us know.
>Wes
>
>In news:2198c01c45c60$7bab5ba0$a601280a@phx.gbl,
>DeeAitch <anonymous@discussions.microsoft.com> hunted
and pecked:
>> Hello,
>>
>> May have posted my question to the wrong area before or
>> now, but this is a puzzle and I could use an expert.
>>
>> Four failed installs of a Creative Audigy 2ZS sound
card
>> has really screwed up my OS or Registry or both.
>>
>> XP will ONLY load fully if I run ChkDsk c: /F(ix) on
each
>> startup. Otherwise the boot process gets to the black
>> screen with the XP colored flag logo and then simply
>> starts rebooting all over again. BUT, it doesn't just
>> reboot, it acts as if the power was turned off and then
>> goes to a check disk. THEN it loads fully. Weird????
>>
>> In my start up list is an entry I'm not familiar with
nor
>> have I seen it on any other system that I use at work:
>>
>> KERNEL/FAULT/CHeck - %systemroot%\System32\dumprep 0 -
k -
>> HKEY_LM\RUN
>>
>> What is this and why is it in my start up list? Hope
>> someone can shed some light. Thanks.
>>
>> DeeAitch
>
>.
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

Wesley Vogel

The fix for turning off Dumprep.exe did not work. I
restarted the computer, it got to the Windows XP Home
progress bar page with the colored flag logo and then
tried to restart. I hit the reboot button and it loaded
to the blue screen check disk, scanned, found no errors
and then loaded the OS and I'm online now with no
apparent problems.

This all seems to be a result of a horrible and failed
install of the SOundblaster I mentioned. I've read
responses from people about failed WinXP Repair
Installs,and I'm not sure about trying that.
What do you think about this? Thanks.

DeeAitch

>-----Original Message-----
>dumprep 0 -k
>
>KernalFaultCheck:
>%systemroot%\\system32\\dumprep 0 -k
>
>Dumprep.exe = Windows Error Reporting Dump Reporting Tool
>
>You can disable this.
>Right click My Computer | Properties | Advanced tab |
Under Startup and
>Recovery |
>Settings button | Under System Failure | UNCheck: 
Write an event to the
>system log | Under Write debugging information | Select
(None) | OK | Apply|
>OK
>
> Write an event to the system log = dumprep0-k
>
>--
>Hope this helps. Let us know.
>Wes
>
>In news:2198c01c45c60$7bab5ba0$a601280a@phx.gbl,
>DeeAitch <anonymous@discussions.microsoft.com> hunted
and pecked:
>> Hello,
>>
>> May have posted my question to the wrong area before or
>> now, but this is a puzzle and I could use an expert.
>>
>> Four failed installs of a Creative Audigy 2ZS sound
card
>> has really screwed up my OS or Registry or both.
>>
>> XP will ONLY load fully if I run ChkDsk c: /F(ix) on
each
>> startup. Otherwise the boot process gets to the black
>> screen with the XP colored flag logo and then simply
>> starts rebooting all over again. BUT, it doesn't just
>> reboot, it acts as if the power was turned off and then
>> goes to a check disk. THEN it loads fully. Weird????
>>
>> In my start up list is an entry I'm not familiar with
nor
>> have I seen it on any other system that I use at work:
>>
>> KERNEL/FAULT/CHeck - %systemroot%\System32\dumprep 0 -
k -
>> HKEY_LM\RUN
>>
>> What is this and why is it in my start up list? Hope
>> someone can shed some light. Thanks.
>>
>> DeeAitch
>
>.
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

DeeAitch wrote:

> The fix for turning off Dumprep.exe did not work. I
> restarted the computer, it got to the Windows XP Home
> progress bar page with the colored flag logo and then
> tried to restart. I hit the reboot button and it loaded
> to the blue screen check disk, scanned, found no errors
> and then loaded the OS and I'm online now with no
> apparent problems.
>
> This all seems to be a result of a horrible and failed
> install of the SOundblaster I mentioned. I've read
> responses from people about failed WinXP Repair
> Installs,and I'm not sure about trying that.
> What do you think about this? Thanks.

I think you have a shutdown problem. Go to www.aumha.org and find the
section on Shutdown issues and go through those. Your Soundblaster
device driver is very likely not allowing Windows to properly shutdown.
When you reboot, Windows insists on doing a chkdsk because Windows was
not shutdown properly. If you can get this device completely removed,
then you should be able to shutdown properly.

One suggestion more. You can enable nonpresent devices in your device
manager. To see nonpresent devices in Device Manager, open a command prompt:

C:\> set DEVMGR_SHOW_NONPRESENT_DEVICES=1
C:\> devmgmt.msc

Then "show hidden" and your nonpresent devices will appear. You can then
delete nonpresent devices like your failed sound card.

To put this environment variable into XP permanently, open System
Control Panel, Advanced tab, Environment Variables button, System Variables:

DEVMGR_SHOW_NONPRESENT_DEVICES=1

Now when you show hidden in device manager, you will see your hidden and
nonpresent devices.

--
Kent W. England, Microsoft MVP for Windows Security

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

Hi Kent,

This does make some sense to me. I have to tell you
though that when the Audigy install failed, I reinstalled
my PCI512 card and the updated XP drivers anyway.

But I'm doing something wrong with command prompt. Don't
use this much. I click Run/cmd/ then typ in c:\> set
DEVMGR . . . this is not recognized. I'm typing too many
characters. I'm still not wise to everything. Please tell
me EXACTLY how to do this.

I did go to device manager and checked Show Hidden . . .
Doesn't seem to be anything unusual in there. My PCI512
and the MIDI/Joystick SBLive! Gameport.

I never had these problems before I tried installing the
Audigy, so I don't think it could be the 512.

I will check your link about shutdown problems and let
you know. Please tell me how to type in the command
prompt correctly. Thanks much.

DeeAitch
>-----Original Message-----
>DeeAitch wrote:
>
>> The fix for turning off Dumprep.exe did not work. I
>> restarted the computer, it got to the Windows XP Home
>> progress bar page with the colored flag logo and then
>> tried to restart. I hit the reboot button and it
loaded
>> to the blue screen check disk, scanned, found no
errors
>> and then loaded the OS and I'm online now with no
>> apparent problems.
>>
>> This all seems to be a result of a horrible and failed
>> install of the SOundblaster I mentioned. I've read
>> responses from people about failed WinXP Repair
>> Installs,and I'm not sure about trying that.
>> What do you think about this? Thanks.
>
>I think you have a shutdown problem. Go to www.aumha.org
and find the
>section on Shutdown issues and go through those. Your
Soundblaster
>device driver is very likely not allowing Windows to
properly shutdown.
>When you reboot, Windows insists on doing a chkdsk
because Windows was
>not shutdown properly. If you can get this device
completely removed,
>then you should be able to shutdown properly.
>
>One suggestion more. You can enable nonpresent devices
in your device
>manager. To see nonpresent devices in Device Manager,
open a command prompt:
>
>C:\> set DEVMGR_SHOW_NONPRESENT_DEVICES=1
>C:\> devmgmt.msc
>
>Then "show hidden" and your nonpresent devices will
appear. You can then
>delete nonpresent devices like your failed sound card.
>
>To put this environment variable into XP permanently,
open System
>Control Panel, Advanced tab, Environment Variables
button, System Variables:
>
>DEVMGR_SHOW_NONPRESENT_DEVICES=1
>
>Now when you show hidden in device manager, you will see
your hidden and
>nonpresent devices.
>
>--
>Kent W. England, Microsoft MVP for Windows Security
>.
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

Kent,

I checked the site you mentioned. Excellent. Then it
dawned on me that this is not a shutdown issue. It's a
start up issue. Windows XP WILL NOT load completely
UNLESS I run a check disk/Fix. Otherwize it gets to a
certain point in the load process and then restarts.
There is something missing from my start up. I can take a
snapshot of what's running at start up, but you can't
show images in here. I'll wait for a reply first. Thanks
again.

DeeAitch


>-----Original Message-----
>Hi Kent,
>
>This does make some sense to me. I have to tell you
>though that when the Audigy install failed, I
reinstalled
>my PCI512 card and the updated XP drivers anyway.
>
>But I'm doing something wrong with command prompt. Don't
>use this much. I click Run/cmd/ then typ in c:\> set
>DEVMGR . . . this is not recognized. I'm typing too many
>characters. I'm still not wise to everything. Please
tell
>me EXACTLY how to do this.
>
>I did go to device manager and checked Show Hidden . . .
>Doesn't seem to be anything unusual in there. My PCI512
>and the MIDI/Joystick SBLive! Gameport.
>
>I never had these problems before I tried installing the
>Audigy, so I don't think it could be the 512.
>
>I will check your link about shutdown problems and let
>you know. Please tell me how to type in the command
>prompt correctly. Thanks much.
>
>DeeAitch
>>-----Original Message-----
>>DeeAitch wrote:
>>
>>> The fix for turning off Dumprep.exe did not work. I
>>> restarted the computer, it got to the Windows XP Home
>>> progress bar page with the colored flag logo and then
>>> tried to restart. I hit the reboot button and it
>loaded
>>> to the blue screen check disk, scanned, found no
>errors
>>> and then loaded the OS and I'm online now with no
>>> apparent problems.
>>>
>>> This all seems to be a result of a horrible and
failed
>>> install of the SOundblaster I mentioned. I've read
>>> responses from people about failed WinXP Repair
>>> Installs,and I'm not sure about trying that.
>>> What do you think about this? Thanks.
>>
>>I think you have a shutdown problem. Go to
www.aumha.org
>and find the
>>section on Shutdown issues and go through those. Your
>Soundblaster
>>device driver is very likely not allowing Windows to
>properly shutdown.
>>When you reboot, Windows insists on doing a chkdsk
>because Windows was
>>not shutdown properly. If you can get this device
>completely removed,
>>then you should be able to shutdown properly.
>>
>>One suggestion more. You can enable nonpresent devices
>in your device
>>manager. To see nonpresent devices in Device Manager,
>open a command prompt:
>>
>>C:\> set DEVMGR_SHOW_NONPRESENT_DEVICES=1
>>C:\> devmgmt.msc
>>
>>Then "show hidden" and your nonpresent devices will
>appear. You can then
>>delete nonpresent devices like your failed sound card.
>>
>>To put this environment variable into XP permanently,
>open System
>>Control Panel, Advanced tab, Environment Variables
>button, System Variables:
>>
>>DEVMGR_SHOW_NONPRESENT_DEVICES=1
>>
>>Now when you show hidden in device manager, you will
see
>your hidden and
>>nonpresent devices.
>>
>>--
>>Kent W. England, Microsoft MVP for Windows Security
>>.
>>
>.
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

DeeAitch wrote:

> This does make some sense to me. I have to tell you
> though that when the Audigy install failed, I reinstalled
> my PCI512 card and the updated XP drivers anyway.
>
> But I'm doing something wrong with command prompt. Don't
> use this much. I click Run/cmd/ then typ in c:\> set
> DEVMGR . . . this is not recognized. I'm typing too many
> characters. I'm still not wise to everything. Please tell
> me EXACTLY how to do this.
>
If you can't type it, then cut and paste it into the command window.
Ctl-P won't work, you have to right-click and select paste in the
command prompt window.

Your old drivers could still be installed.

--
Kent W. England, Microsoft MVP for Windows Security

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

DeeAitch wrote:

> I checked the site you mentioned. Excellent. Then it
> dawned on me that this is not a shutdown issue. It's a
> start up issue. Windows XP WILL NOT load completely
> UNLESS I run a check disk/Fix. Otherwize it gets to a
> certain point in the load process and then restarts.
> There is something missing from my start up. I can take a
> snapshot of what's running at start up, but you can't
> show images in here. I'll wait for a reply first. Thanks
> again.
>
Follow my previous advice first and eliminate that possible solution
before you follow this path.

--
Kent W. England, Microsoft MVP for Windows Security

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

I understand you about cut and paste. I'm saying the
command "DEVMGR_SHOW . . ." pops up an error message
saying "Windows can not find . . ." You've instructed me
to type in: C:\> set DEVMGR_SHOW_NONPRESENT_DEVICES=1
C:\> devmgmt.msc

When I type it as you've represented it, I get an error.
If I just paste in from DEVMGR over, I get the error.
That's why I said tell me exactly because I don't use the
command pronmt that often.

So, I click Start/Run then type in (exactly): - - - - - ?

I can open the Device Manager and show hidden devices
though. Is this what you were suggesting?

I really do appreciate your help. I'm on the edge of
total frustration with this, though. Sorry.

DeeAitch.

>-----Original Message-----
>DeeAitch wrote:
>
>> This does make some sense to me. I have to tell you
>> though that when the Audigy install failed, I
reinstalled
>> my PCI512 card and the updated XP drivers anyway.
>>
>> But I'm doing something wrong with command prompt.
Don't
>> use this much. I click Run/cmd/ then typ in c:\> set
>> DEVMGR . . . this is not recognized. I'm typing too
many
>> characters. I'm still not wise to everything. Please
tell
>> me EXACTLY how to do this.
>>
>If you can't type it, then cut and paste it into the
command window.
>Ctl-P won't work, you have to right-click and select
paste in the
>command prompt window.
>
>Your old drivers could still be installed.
>
>--
>Kent W. England, Microsoft MVP for Windows Security
>.
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

You have to open a command prompt first. Do not type or
paste the info in the Run box.

To open a command prompt....
Start | Run | Type: cmd | OK |
A window with a black background and a white cursor pops open.
Now enter the info Kent posted.

--
Hope this helps. Let us know.
Wes

In news:2473801c45fe6$23bad4a0$a601280a@phx.gbl,
DeeAitch <anonymous@discussions.microsoft.com> hunted and pecked:
> I understand you about cut and paste. I'm saying the
> command "DEVMGR_SHOW . . ." pops up an error message
> saying "Windows can not find . . ." You've instructed me
> to type in: C:\> set DEVMGR_SHOW_NONPRESENT_DEVICES=1
> C:\> devmgmt.msc
>
> When I type it as you've represented it, I get an error.
> If I just paste in from DEVMGR over, I get the error.
> That's why I said tell me exactly because I don't use the
> command pronmt that often.
>
> So, I click Start/Run then type in (exactly): - - - - - ?
>
> I can open the Device Manager and show hidden devices
> though. Is this what you were suggesting?
>
> I really do appreciate your help. I'm on the edge of
> total frustration with this, though. Sorry.
>
> DeeAitch.
>
>> -----Original Message-----
>> DeeAitch wrote:
>>
>>> This does make some sense to me. I have to tell you
>>> though that when the Audigy install failed, I reinstalled
>>> my PCI512 card and the updated XP drivers anyway.
>>>
>>> But I'm doing something wrong with command prompt. Don't
>>> use this much. I click Run/cmd/ then typ in c:\> set
>>> DEVMGR . . . this is not recognized. I'm typing too many
>>> characters. I'm still not wise to everything. Please tell
>>> me EXACTLY how to do this.
>>>
>> If you can't type it, then cut and paste it into the command window.
>> Ctl-P won't work, you have to right-click and select paste in the
>> command prompt window.
>>
>> Your old drivers could still be installed.
>>
>> --
>> Kent W. England, Microsoft MVP for Windows Security
>> .

 

[Guest]

Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)

Wesley Vogel wrote:
> You have to open a command prompt first. Do not type or
> paste the info in the Run box.
>
> To open a command prompt....
> Start | Run | Type: cmd | OK |
> A window with a black background and a white cursor pops open.
> Now enter the info Kent posted.
>
Exactly so. I'm sorry I didn't explain the difference between Run and
command prompt window. The two commands have to be in the same window
for the environment variable to affect Device Manager.

--
Kent W. England, Microsoft MVP for Windows Security