2 Sapphire 5770 Crossfired settings

[pjmoses]

Any idea what I should set my <CCC> settings to to get the best performance? When I mess with it I get a yellow screen with lines through it. It is set at 860 and 1285 right now, both of them.

 

[pjmoses]

PS. Do you now have to buy 3D Mark Advantage?

 

[viper_69]

no you dont have to buy 3dmark...you can pay for extra features but to run your basic benchmarks the free download is all you need the only thing is that it only tests at 1280/1024 res. as for your clock settings there is no fixed settings for x firing or any card for that matter....every card is a bit different even if its the same model.... and it depends on what your mobo can handle and how good your ram is...if your overclocking...good geeberal rule is
1. start @ stock
2. run tests
3. if everything is fine raise core 5 and memory 10
4. run tests and repeat
untill you see your performance drop or your crashing then back off 10 on the core and if your getting lines and 10 on the mem if your screen starts to pixulate. also try uping your northbridge a notch in voltage you night find that helps