Sign in with
Sign up | Sign in
Your question

Unable to set the voltage in bios (gigabyte h55m-s2)

Last response: in Overclocking
Share
June 4, 2011 10:39:37 AM

hiii i have read many threads in this forum
i have intel i3 530 processor 2.93 ghz, 2gb ram ,500 gb hard disk, nvidia geforce 8400 gs graphic card
i want to overclock my processor but in my bios there is no option for setting cpu voltage or vcore voltage
i have gigabyte h55m-s2 main board, i took this board so that i may overclock my pc.
i have overclocked my cpu and my ram upto 3.30 ghz and 1500 mhz
but the problem is it is still slow i want to set the voltage but because of my bad luck i am unable to set it i.e from 1.264 to 1.32
in my bios there is each and every option except two options

load line calibration and cpu vcore

if it is not going to change is there is any software through which i can change my cpu voltage

i would be very much thankful to forum

<PLEASE HELP ME>
June 4, 2011 1:10:07 PM

I had the same trouble in my Asus motherboard, but noticed an option that was set on auto that needed to be set to manual. Double check that in the same tab that you are setting your bus, or multiplier that anything else is set to manual....short of that, just try a quick internet search on your mobo model (or bios revision) and see if there's something you're missing....hope this helps
m
0
l
June 13, 2011 9:44:00 PM

Same problem, sadly I've got
Quote:
Dear Valued Customer,

Thank you for contacting ASUS Customer Service.

Hello,

I'm afraid to say that the vcore can not be changed due to the hardware design.


But still looking for a way how to lower voltage :D 
m
0
l
!