Need help overclocking intel dualcore e2200

[mishu37]

i have a dual core e2200 2.2 Ghz with Asus P5KPL-AM and # Giga of DDR2 Ram (800 Bus)

my current cooling situation= idle 42 C cpu and load 46 C cpu. should i consider adding more cooling?

i wonder if any one can share the settings to overclock my cpu?

multiplier= ??
bus speed = ??
rated fsb= ???
core voltage = ??

and also please mention any more fact that i should know of...

and how farther should i go with overcoating? how far is safe? 2.8? 3.0 Ghz?

thanks in advance...

 

[xanxaz]

you FSB is at 200 in bios... try 333... without voltage increase, if not stable up the voltage 0,2 V in bios. dont go past 1.45V in any case. your CPU should hit 3.33Ghz. it will probably clock higher but that should be enough. if not, trade for a better one

 

[mishu37]

you FSB is at 200 in bios... try 333... without voltage increase, if not stable up the voltage 0,2 V in bios. dont go past 1.45V in any case. your CPU should hit 3.33Ghz. it will probably clock higher but that should be enough. if not, trade for a better one

thanks man.... i will follow these steps with cautions.. after all, IT IS A DANGEROUS WORK ANYWAY!!!

i will keep informed here.

thanks again

 

[mishu37]

i have done it. just a little. but its stable now. i incresed about 20 percent of total power..
next will try some more...

 

[mishu37]

Best answer selected by mishu37.