Sign in with
Sign up | Sign in
Your question

Need Help OC'ing my AMD Phenom II X4 955 BE w/ Asus M4A78-EM

Tags:
  • CPUs
  • Asus
Last response: in CPUs
Share
September 19, 2009 10:03:09 PM

i have an Asus M4A78-EM with newest bios 1006. i have the Processor Frequency multiplier to x 18.0 and my system is running at 3600Hz and stable so far. however i have a few more questions.

North Bridge Chipset Config:
ECC Mode - disabled, basic, good, super, max and user. i have it set at good right now. what does this mean and what setting should i use.

JumberFree Cinfig:
Auto, 8bit, 16 bit. i have it set at Auto now. what does this mean and what setting should i use.

Hyper Transport Speed:
Auto, 200MHz - 2.0 GHz. i have it set at 2.0GHz. what does this mean and what setting should i use.

Hyper Transport Width:
Auto, 8bit, 16bit. i have it set on auto.what does this mean and what setting should i use.

OverClock options:
auto, 2%, 5%, 8%, 10%. i have it set as Auto. what does this mean and what setting should i use.

TY for any help

- Bred By Aliens

More about : ing amd phenom 955 asus m4a78

October 24, 2011 1:42:39 AM

I have 2 Phenom II X4 955 BE & Asus M4a78-EM.
I used actually 4.0Ghz on my comp.

Do smthn like thiz:

North Bridge Chipset Config:
ECC Mode - MAX

JumperFree Config: 16 Bit

Hyper Transport Speed:
Use on 3,8 - 3,9 GHZ on 2000MHz, but if U Can 4.0 ,ust get 2200MHz and gave 12X on NB.

CPU Over Voltage: +100 (on 3,8) and +150 above this (u can have enabled CnQ & C1E Support, but after if U test the stability).

Loadline Calibration: Give 2 Auto cuz i have like that & i don't know what 4 is thiz ***.


Other Questionz reply on my mail, will be quickly:

accountgtagfwl@gmail.com

CU
m
0
l
!