Help with Water Cooling

[Cory23]

Hi, this is my first time posting on this website. I was just wondering if these specs will work and do good together for my first water cooling setup!

- EK-Supreme HF High Flow - CPU Water Block
- Black Ice® GTX Gen Two Xtreme 360 Highest Performance Radiator
- Primochill Myriad D5 Dual Bay Reservoir / Pump Housing( I will be putting a Swiftech MCP655 pump in there)
- PrimoFlex Pro LRT UV Blue Tubing -1/2in. ID X 3/4in. OD
- Feser One F1 Cooling Fluid - Clear/UV Blue

I will be using all rotary compression fittings by Bitspower, either normal, 45 degree, or 90 degree

This will be cooling a i7 2600k and a EVGA GTX 590 Hydro Copper

Hows this sound? Give me any feed back on what i might be able to do different or change to make this better

 

[tecmo34]

This topic has been moved from the section CPU & Components to section Overclocking by Tecmo34

 

[orangejuice789]

I would ditch the cooling fluid and just use distilled water and some biocide or a killcoil.

That RAD also has a high fin per inch and would need some fast fans that would be a bit noisy to perform well... Maybe the Thermochill PA 120.3 or the XSPC RX360 would be a better bet.

http://skinneelabs.com/triple-radiator-comparison-v2/4/

 

[Cory23]

I would ditch the cooling fluid and just use distilled water and some biocide or a killcoil.

That RAD also has a high fin per inch and would need some fast fans that would be a bit noisy to perform well... Maybe the Thermochill PA 120.3 or the XSPC RX360 would be a better bet.

http://skinneelabs.com/triple-radiator-comparison-v2/4/

Would 3 Scythe 1800rpm fans work

 

[rubix_1011]

Those fans would do very well.

 

[Cory23]

Those fans would do very well.

Thanks for the quick response