Tom's Hardware > Forum > CPU & Components > CPUs > [Solved] Is my cpu broken?

[Solved] Is my cpu broken?

Forum CPU & Components : CPUs - [Solved] Is my cpu broken?

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Best answer from flyin15sec.

Word :    Username :           
 

ok so i'm pretty sure we had a power surge last night. Computer would not turn on in the morning until i reset our surge protector, after which it turned out. I was presented with something along the lines of: "CPU is not working our has been changed - CPU SOFT MENU." I also have a feeling it only picked up one of my RAM chips. I pressed F1 to continue, and everything worked fine. I restarted the computer and it just did the same thing. What does this mean?

By the way i have an intel e6750 2.66ghz, and an abit motherboard.

Thanks

No , your CPU is working fine. More than likely it could be your motherboard that is not working.

You should go ahead and run CPUz to make sure that your CPU is working at it's rated speed.

Also reset your BIOS, and load fail safe defaults. See if that helps.
Sponsored Links
Register or log in to remove.
Best answer

No , your CPU is working fine. More than likely it could be your motherboard that is not working.

You should go ahead and run CPUz to make sure that your CPU is working at it's rated speed.

Also reset your BIOS, and load fail safe defaults. See if that helps.

Reply to flyin15sec

yea still works fine, just have to press F1 in POST to make it keep going.

Reply to fordy9

Hmm.

Almost like my old 690G. Check the BIOS settings.

Reply to amdfangirl

fordy9 wrote :

ok so i'm pretty sure we had a power surge last night. Computer would not turn on in the morning until i reset our surge protector, after which it turned out. I was presented with something along the lines of: "CPU is not working our has been changed - CPU SOFT MENU." I also have a feeling it only picked up one of my RAM chips. I pressed F1 to continue, and everything worked fine. I restarted the computer and it just did the same thing. What does this mean?



It means the CMOS battery on the motherboard has run out. Replace it and all will be well for a few more years.

Reply to Andy2008

fordy9 wrote :

ok so i'm pretty sure we had a power surge last night. Computer would not turn on in the morning until i reset our surge protector, after which it turned out.


What did you reset in a surge protector. Nothing exists in a surge protection circuit to reset.

However if that disconnected and reconnected the computer, then would reset a protective lockout circuit inside the computer. This circuit can be triggered by events such as too frequent power restoration. That is not a surge. That would be a blackout or extreme brownout.

From the many events that could account for your post; what amdfangirl posted could also explain your problem. Better is to measure the battery with a meter to know if that is the problem. Just replacing the battery would not report that you have found and corrected the problem. You do want to know if the problem was really solved. Others can be helpful only if you measure the old battery's voltage.

Reply to westom

yea its all fine now, all i had to do was reset the bios / load the fail safe defaults.

about the surge protecter, it came with clear instruction that if there is a surge, you disconnect everything from it then press a button and it resets, then everythings good to go.

thanks for all the help guys.

Reply to fordy9

fordy9 wrote :

about the surge protecter, it came with clear instruction that if there is a surge, you disconnect everything from it then press a button and it resets, then everythings good to go.


This is what you do for any $3 power strip even without surge protector components. That power strip is a $3 power strip with some ten cent parts installed to increase its price to ... how much?

The surge it protects from is the same surge that any $3 power strip is required to protect from. That computer protection is same in a $3 power strip or a $150 surge protector strip. Reset button is for human safety - not for transistor safety.


Message edited by westom on 09-29-2009 at 05:12:36 PM
Reply to westom
Tom's Hardware > Forum > CPU & Components > CPUs > [Solved] Is my cpu broken?
Go to:

There are 1129 identified and unidentified users. To see the list of identified users, Click here.

Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them