I have 13x multiplier and 200Mhz CPU Clk....

[anuk07]

My question is i saw on my BIOS -->

Cpu clock ratio --> [Disabled]
x Cpu clock ratio --> 13X
CPU N/2 ratio --> [Enabled]
Auto detect PCI Clk --> [Enabled]
spread spectrum --> [Disabled]
CPU clock --> [200MHZ] 232MHZ max.
DDR2 Voltage --> [1.90v]
Chipset Voltage --> [1.250]



Processor E5400 2.7Ghz
Mother board is Zotac G31 - value.....
how should i do variation to obtain 3.0Ghz ?


i know the mobo and processors are very weak...but are there any possibilities to overclock

 

[saint19]

Using your CPU Clock, but changing that you also change the DRAM frequency, so, be sure what're you doing.

 

[kenhikage]

Start with everything low except your multi

 

[kenhikage]

Sorry, I'm on my phone and that message sent prematurely. Also, I can't edit it for some reason. It should have read:

Start with everything low except your multiplier. Crank that up as high as you are comfortable with and slowly increase the rest keeping track of temperatures and stability.

You really should read the sticky on overclocking. And remember, read to completion before tinkering.

 

[anuk07]

So 3.0Ghz will be no harm on this mobo.... i have stock cooling....

 

[henydiah]

Overheat will kill your hardware, Get aftermarket cooler like hyper 212 ..

 

[anuk07]

Ok Ok Chill i am not overclocking it right now...... thancks for your suggestion...

 

[anuk07]

Best answer selected by anuk07.