Double check on my 2500k settings Tags: CPUs Turbo Boost Overclocking Last response: July 6, 2011 1:57 AM in Overclocking Share ebiso July 6, 2011 1:01:05 AM Hi, I have increased my multiplier to 40X set my voltage to 1.260 set my CPU PLL vol to 1.80000000000000 turned turbo boost off everything else is left at auto, is that ok or should i manually change the vdroop control, I/O volt, SA volt ect? More about : double check 2500k settings Leaps-from-Shadows a b à CPUs a b K Overclocking July 6, 2011 1:57:03 AM If all you want is 4.0GHz, those settings are fine. You shouldn't need to change anything else. Even 4.5GHz should be just as easy for most people: Change voltage to 1.3-1.35v Change multiplier to 45x Save and exit Can't find your answer ? Ask ! Publish Related resources SolvedDouble Check minimum system requiermant Forum SolvedDouble boot On Gigabyte 990fx when changing bios settings Forum SolvedDouble check to make sure I'm not making any noob mistakes. Forum Solved1st build, Double check Forum SolvedAnother about to purchase thread need double check Forum SolvedDouble Check My Build? About to pull the trigger on it. Forum SolvedCan someone double check my rig? Forum SolvedBuying tonight, please double check my shopping list Forum SolvedDouble check build for friend before we start purchasing. Forum SolvedDouble Check build Forum Solveddouble check on my system Forum Solveddouble check build Forum SolvedDay Trading Computer DOUBLE CHECK Forum SolvedDouble Check For Gaming PC For Tomorrow, Help Needed, Thank You Forum Solved$2000 gaming rig double check Forum SolvedCheck out my rig (double check compatibility of parts/PSU,etc)? Forum SolvedMy first rig (can you guys double check everything)? Forum SolvedDouble check my build? Forum SolvedNew Build double check, $1100 Forum SolvedDouble check my first build please! Forum More resources Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !