Memory Updgrade for ECS 945GZT-M

[williemillbrae]

I have a Fry's/GQ5140 pc. Now I am having issues will my memory upgrade. I am trying to install Corsair Model# TWIN2X4096-6400C4DHX, which is a 2 x 1 GB DDR2 800. My computer powers up, but does not boot. I ensured the sticks are seated properly. Any ideas? Both corsair and ECS claim to support the memory.

 

[roonj]

set the voltage for the ram in bios to what corsair says, assuming they are the only modules in the board.

 

[williemillbrae]

Thanks. The voltage on the RAM is 1.80v. The lowest on the bios is 1.84v.

 

[roonj]

In performance mode those chips should be given 2.1v according to Corsair.

 

[cecastan]

The 945GZT-M (v1.0) provides 2 DIMM sockets using Dual Channel 240-pin DDR2 with a total capacity of up to 2GB-32bit. You can install only DDR2 400/533MHz Memory.