Can Only Load Windows In VGA Mode.
Last response: in Graphics & Displays
Hello, I recently had some work done on my desktop and according to the shop everything is fine, good news, however since i got it back from the shop the only display setting that works is the VGA mode, every other setting loses signal!and its driving me crazy!
Im using windows XP and a NVIDIA FX 5200, with an ASUS vw192s monitor, everything worked smoothly before putting it into shop,
I'd love some help as since this problem everyone has been taking my new laptop and im not in the mood to share!
Im using windows XP and a NVIDIA FX 5200, with an ASUS vw192s monitor, everything worked smoothly before putting it into shop,
I'd love some help as since this problem everyone has been taking my new laptop and im not in the mood to share!
More about : load windows vga mode
They either are bad at repairing, or someone in the shop may have put a driver in for a different monitor. Check the device manager for monitors, then look for monitors that you don't have.
If you get properties on the desktop, then select settings, then Advanced settings... it will show the Monitor stuff as well.
If you get properties on the desktop, then select settings, then Advanced settings... it will show the Monitor stuff as well.
Related ressources:
- ForumCan Only Load Windows In VGA Mode .
- ForumMonitor Only Displays in VGA mode
- ForumI cant start windows on normal mode , only safe mode
- ForumCan't enable VGA mode
- ForumScreen doesn't work, only on safe mode
- ForumMy Monitor Only Works in Safe Mode
- ForumMonitor only working in Safe Mode (Win7)
- ForumWindows boots safe mode only - can't even reinstall
- ForumWindows XP will only load in Debugging Mode
- ForumAfter installing win 7 only boots in vga or safe mode
- ForumVGA Mode was turned off, how do I get it back when I have ..
- ForumHD3870 - Only VGA output? What's wrong?
- ForumHELP! I can only get 16-color mode !
- ForumCan only boot in IDE mode after installing Windows 8 in AHCI mode
- ForumWindows crashes after bootscreen, can't load any other mode
- ForumWindows fails to load with drivers installed
- ForumVGA / DVI converter not working - monitor goes into power saving mode
- ForumWindows 7 only boots in safe mode - otherwise EXTREMELY slow
- ForumXP Safe Mode boot hangs after load of KDCOM.DLL
- ForumGtx 670 sli 3840x1920
- More resources
Read discussions in other Graphics & Displays categories
!
