/ Sign-up
Your question

Clear CMOS backpanel DFI P55

  • DFI
  • CMOS
  • Motherboards
Last response: in Motherboards
December 28, 2009 3:50:28 AM

how i can use clear CMOS in the back panel DFI type DK-P55 T3eH9??Because i can't use it when i push the button.

More about : clear cmos backpanel dfi p55

Related resources
Can't find your answer ? Ask !

Best solution

a c 78 V Motherboard
December 29, 2009 1:13:43 PM

Be sure there is no power to the board - disconnect the power cord from the power outlet. Press and hold the button for about 30 seconds.

If that doesn't clear the BIOS (keep the power cord disconnected):

-- Remove the silver, round battery from the motherboard - you should see the "+" sign ,

-- Press the computer's power-on switch for 10 to 15 seconds.

-- Wait another 30 minutes,

-- Re-install the battery to the board "+" sign facing you,

-- Press and hold the CMOS Clear button on the back of the board.

-- Now re-connect power to the computer and try to enter the BIOS by pressing the <delete> key.

Reset the BIOS settings you need to run your system - the boot order of your drives and the first HDD to load.
August 27, 2010 6:55:07 AM

Best answer selected by h3ndr1.