I have 2 ribbon cables that came with my motherboard - one is an IDE cable and the other is a floppy drive cable. I don't have a floppy drive so I am not concerned about that one, but what is the IDE cable for? I can't find any edge connectors on the vid card, hard drive, or dvd unit, so I am wondering if it is not required with my build.
Also, the corsair psu has any 8 pin EPS12V connector that I plugged into the ATX_12V_2X connector on the motherboard.
I assumed that was where it went because they are both 8 pin connectors - was I correct?
Here are the specs for my new build, just finished up this morning:
GIGABYTE GA-EX58-UD3R Core i7 Intel X58 ATX Motherboard
MSI N260GTX-T2D896-OCv4 GeForce GTX 260
i7-920 2.66GHz 8MB LGA1366 CPU
CORSAIR CMPSU-750TX 750W ATX12V / EPS12 Compatible with Core i7 Power Supply
XIGMATEK Dark Knight-S1283V 120mm Long Life Bearing CPU Cooler
OCZ Platinum 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Western Digital Caviar Black 640GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
SAMSUNG Black 22X 2MB Cache SATA 22X DVD Burner
Antec Twelve Hundred Case
Also, the corsair psu has any 8 pin EPS12V connector that I plugged into the ATX_12V_2X connector on the motherboard.
I assumed that was where it went because they are both 8 pin connectors - was I correct?
Here are the specs for my new build, just finished up this morning:
GIGABYTE GA-EX58-UD3R Core i7 Intel X58 ATX Motherboard
MSI N260GTX-T2D896-OCv4 GeForce GTX 260
i7-920 2.66GHz 8MB LGA1366 CPU
CORSAIR CMPSU-750TX 750W ATX12V / EPS12 Compatible with Core i7 Power Supply
XIGMATEK Dark Knight-S1283V 120mm Long Life Bearing CPU Cooler
OCZ Platinum 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Western Digital Caviar Black 640GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
SAMSUNG Black 22X 2MB Cache SATA 22X DVD Burner
Antec Twelve Hundred Case