Volume write back cache for Raid 0
Last response: in Storage
I have 4 Seagate 500gb 7200.12 ST3500418as CC46fw running as Raid 0. In Intel Matrix Console, should I enable or disable " volume write-back cache "? I have heard this should only be enabled for RAid 5. Thanks in advance for any help or info.
This is with write-back cache disabled:
![]()
and with write-back cache enabled:
![]()
Looks like with it enabled the max speeds are higher and fluctuate but average speeds is slower
This is with write-back cache disabled:
and with write-back cache enabled:
Looks like with it enabled the max speeds are higher and fluctuate but average speeds is slower
More about : volume write back cache raid
Related ressources:
- Forumraid 0 w/ volume write-back cache enabled on ich8r
- ForumVolume Write-Back Cache for RAID 1
- ForumWrite-back cache + raid 0 = reliable/safe?
- ForumWrite Back Cache (Failure Scenarios)
- ForumRAID 0 Volume Poor Performance
- ForumZ68 - SRT cache and boot volume on single SSD disk - full success!
- ForumRaid 5 write-back caching?
- ForumRAID0 volume lists failed, probably OK physically, what to do?
- ForumICH9R; RAID 5; cannot re-add drive to volume
- ForumSSD Caching and Raid 0
- Forumslow write speeds on LSI RAID controller card
- ForumRAID 5, first write insanely fast, slow after +- 1,5GB
- ForumRaid 0 Storage Space Doubles?
- ForumMy computer is saying that there is a hard disk failure
- ForumDvd writer plays dvds but won't write or play cds
- ForumRaid 0 x58 sabretooth crucial c300 issues - rubbish read speed
- ForumSetting up a RAID with Hackintosh
- ForumWindows XP 64 on single HD to Windows 7 on RAID 10
- ForumHow to repair a faulty RAID arrays error
- ForumWindows7 64bit does not boot after setting raid 0
- More resources
Read discussions in other Storage categories
!
