Setup a raid configuration after win 7 install on a SSD?
Last response: in Storage
I was curious if anyone was able to add a raid config after win 7 was installed on a SSD? I was able to set it up after I added 2 identical drives and setup the raid. How can I verify that they are in fact setup properly besides the two drives only showing as one? Thanks
More about : setup raid configuration win install ssd
Related ressources:
- ForumCrosshair iv formula, RAID mode, singl SSD not detected at W 7 install
- ForumPlease Confirm Proper SSD + 2HDD Set-Up for New Win 7 64 Build
- ForumCannot install win 7 on Intel 520 SSD
- ForumRAID 10 Data Drive setup with SSD Boot Drive
- ForumWin 7 go from 1 disk no raid to 2disk raid w/o re- install ?
- ForumSSD boot drive & RAID -0 Storage setup
- ForumHow to install win 7 pro 64 and win xp 32 in RAID 1 & as dual boot?
- ForumUnable to ADD RAID controller after win7 install
- ForumProper sequence for new build/ install raid 0+1 & WIN7 64bit
- ForumSetting up EFI - GPT based RAID 0 Setup . Stuck in windows install loop
- ForumWin 7 SSD
- ForumSSD Boot Drive with a RAID 0 games setup
- ForumHow 2 configure ASUS P6T w/lone SSD + SATA RAID ?
- Forum1 HDD vs. 2 HDD RAID-0
- ForumTrouble shooting RAID
- Forum[Solved] New build; first time RAID/SSD
- ForumVolume write back cache for Raid 0
- ForumLocked out of HDD after a freeze during formatting :(
- ForumRaid 0 w/ 2x SSD
- ForumRaid 0 x58 sabretooth crucial c300 issues - rubbish read speed
- More resources
Read discussions in other Storage categories
!
