Sign in with
Sign up | Sign in
Your question

Two SATA DVD Drives?

Tags:
  • DVD Writers
  • SATA
  • DVD Drives
  • Storage
Last response: in Storage
Share
April 2, 2011 9:41:30 PM

Just decided to add a second SATA DVD drive to my old mobo, a Abit IC7 Max 3,
Before, i had a IDE and a Sata DVD Drive, which worked and booted WXP fine,
So, got my second drive, in fact a Blu-ray drive, to try it quick, i just took my first SATA DVD drive out and fitted the new Blu-ray drive, (same connections)
worked fine, but when i decided to remove my old IDE DVD drive and refit the other SATA DVD Drive,

It would not boot up into Windows, just got the error message "Disk Boot Failure"

Disconnected the last SATA DVD Drive fitted, booted fine,

Is it not possible to have two SATA DVD Drive's fitted to an older mobo like mine?
Or, do i have to do something to the way it boots windows in the BIOS?
Any help will be great, thanks

More about : sata dvd drives

a b G Storage
April 2, 2011 9:58:58 PM

Shouldn't be a problem to do this. Just ensure in the bios that the first boot device is the hard drive with windows on it.
April 2, 2011 10:21:21 PM

Ok, went into BIOS,
options set are-

First Boot Device- Floppy Disk (yes, i still have a floppy fitted, never used it in years!)
Second Boot Device- Hard Drive
Other Boot Device- CD-ROM

So, i disabled CD-ROM as other boot device, and left others as above,
Still got same error mesage-

VERIFYING DMI POLL DATA-
"DISK BOOT FAILURE, INSERT SYSTEM DISK & PRESS ENTER"
(Which is exactly what it says)

Should i set first boot device to my C: drive and disable the other two?
Related resources
a b G Storage
April 2, 2011 10:47:20 PM

There should be another option somewhere that lists the hard drive / sata order. Ensure that your c: drive is the first option.

If you can't find something like this you can try switching the sata connectors around on the motherboard. It's likely the boot priority is linked to the sata port number. So if you were to say have 4 sata ports they'd be numbered 0 to 3. Have your c: drive connected to the 0 (first) port. Generally the numbering is printed on the motherboard, if not your motherboard manual should have a diagram indicating the numbering.
April 2, 2011 10:51:25 PM

C: is a SATA HDD that boots from, i think, is No1 SATA port, think you can only boot from 1&2 SATA ports,
I'll dive into BIOS and have a look for what you suggest Rustin'
Thanks
a b G Storage
April 2, 2011 11:42:09 PM

Remember that IDE has to be jumpered correctly for it to work. My guess is your boot drive is also IDE and not sata. Removing the DVD drive is messing up your IDE cable. Remove the drive, and double check your cables/jumpers.
April 3, 2011 6:25:36 PM

4745454b said:
Remember that IDE has to be jumpered correctly for it to work. My guess is your boot drive is also IDE and not sata. Removing the DVD drive is messing up your IDE cable. Remove the drive, and double check your cables/jumpers.


Addict,
its def a SATA, infact its a SP2504C

I've just removed an old DVD Re-Writer, the tray would not open, which was IDE
April 6, 2011 7:33:21 AM

OK, tried this- Boot C: HDD & the DVD that works are connected to SATA 1 & 2 consecutively on my mobo, SATA 1 & 2 are in a small group, separate to SATA's 3,4,5 & 6, which are in a group below them,
Disconnected SATA2 DVD, the one that works and connected the other one to SATA 4, have working HDD's in SATA's 5&6,
Still same result,

VERIFYING DMI POLL DATA-
"DISK BOOT FAILURE, INSERT SYSTEM DISK & PRESS ENTER"

Re-connected, Fine,
So that suggest's to me that it is a BIOS setting, but i have two SATA HDD's working fine in the same group, SATA's 3-6?
Wish there was an idiot guide somewhere,
Or may contacting Abit.....
a b G Storage
April 6, 2011 8:16:33 AM

Have you tried hooking up only the boot drive and the possibly bad optical drive?
April 6, 2011 8:51:30 AM

Sorry, was not clear enough, its not the drive itself thats bad, its the connection to the mobo that i cannot work out how to configure correctly, when any DVD or BD is connected to SATA 2 (C: boots from SATA 1) it works OK, but when i connect a DVD or BD up to, it seems the separate group SATA's 3-6 i just get -

VERIFYING DMI POLL DATA-
"DISK BOOT FAILURE, INSERT SYSTEM DISK & PRESS ENTER"

From the BIOS when booting, but there are two SATA HDD's working fine, which are connected to SATA 3-6?
Am trying to find out how to configure a Optical Disc drive to work on SATA's 3-6
a b G Storage
April 6, 2011 10:16:52 AM

I wonder if SATA 3-6 doesn't support optical drives? Try plugging both optical drives into 1 and 2. Put all other drives on 3-6. (boot drive in 3, why not...) Make sure the bios still sees the boot drive, and its still the drive it will try booting from. I'm not sure it can boot from the SATA 3-6 controller, so don't be surprised if it still doesn't work.
April 6, 2011 11:09:33 AM

4745454b said:
I wonder if SATA 3-6 doesn't support optical drives? Try plugging both optical drives into 1 and 2. Put all other drives on 3-6. (boot drive in 3, why not...) Make sure the bios still sees the boot drive, and its still the drive it will try booting from. I'm not sure it can boot from the SATA 3-6 controller, so don't be surprised if it still doesn't work.


Thats been at the back of my mind, am pretty sure from what i can remember, a HDD will not boot from 3-6,

Have a PCI SATA card that i'm going to try, when i find time!
Cheers
a b G Storage
April 6, 2011 11:38:50 AM

A hdd probably will boot from 3-6, but you'll need the drivers for it. If you've ever heard about needing to press F6 during install that's what they are talking about.
April 6, 2011 10:22:51 PM

Think i may have heard about the F6 thing, long time ago when i built my PC,
Had a thought tho,
at mo, DVD-RW is on SATA 4 (when connected) and two SATA HDD's on SATA's 5&6,
Think i'll try HDD's on SATA's 4&5 and the DVD-RW on SATA 6,
to see what happens?
Bit nervous about messing with my C: when its working OK
a b G Storage
April 7, 2011 3:26:27 AM

In theory as a serial point to point bus, what you plug into what number shouldn't matter. You should be able to boot from SATA 6 as long as you have the right driver. And I totally understand not wanting to mess with the C drive. As long as you don't delete or format anything you should just get the not able to boot msg you've been getting.
!