I figured my setup should pull this no problem - I got 36 amps on the 12v rails. When I use ATI's AutoTune feature on my card, I can't set the clock past 500 Mhz - it doesn't change no matter what I specify. I'm talking about the "Current Values" panel. Any idea?
current values is your current clock... which is throttled down to save power... if you run a stress test and watch the clock at the same time... you will notice then number jump up
------------------------------ E6600 @ 3.6, 2 X HD4850(680/1150), OCZ 4Gigz
Reply to xc0mmiex