Setting question x48-ds4 ocz pc8500 1066 Tags: Memory BIOS OCZ Overclocking Last response: August 1, 2011 7:57 PM in Overclocking Share ChrisTeitge July 31, 2011 9:55:46 PM what setings do i need to change in the bios to get the best out of this ram 2 x 2gb oczpc8500 gold edition. System as follows MOB gigabyte x48-ds4 Bios lates F3B Cpu quad Q9300 @2.5 2.5 4GB ocz 8500 gold edition 2 x xt2900 gcards sli win 7 64 bit Cheers More about : setting question x48 ds4 ocz pc8500 1066 henydiah a b } Memory a c 242 K Overclocking August 1, 2011 3:53:27 AM your mobo Support for DDR2 1200/1066/800/667MHz, ECC, non ECC memory modules. http://www.gigabyte.com/products/product-page.aspx?pid=... and your RAM the best setting 1066 with tight timming CAS 4-4-4, but this need increase voltage 1.9v and need test stability use IBT (intelburn Test ) ChrisTeitge August 1, 2011 7:57:52 PM henydiah said:your mobo Support for DDR2 1200/1066/800/667MHz, ECC, non ECC memory modules. http://www.gigabyte.com/products/product-page.aspx?pid=... and your RAM the best setting 1066 with tight timming CAS 4-4-4, but this need increase voltage 1.9v and need test stability use IBT (intelburn Test ) Thanks for that ill give it ago....thanks again Can't find your answer ? Ask ! Publish Related resources OCZ Reaper HPC ddr2 pc8500 1066mhz problem Forum Setting up OCZ Reaper PC8500 on Rampage formula Forum Noob ram settings question - 1600mhz but only shows 1066 Forum Question about timing on my OCZ Reaper Memory: Settings/current value Forum More resources Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !
ChrisTeitge July 31, 2011 9:55:46 PM what setings do i need to change in the bios to get the best out of this ram 2 x 2gb oczpc8500 gold edition. System as follows MOB gigabyte x48-ds4 Bios lates F3B Cpu quad Q9300 @2.5 2.5 4GB ocz 8500 gold edition 2 x xt2900 gcards sli win 7 64 bit Cheers More about : setting question x48 ds4 ocz pc8500 1066
henydiah a b } Memory a c 242 K Overclocking August 1, 2011 3:53:27 AM your mobo Support for DDR2 1200/1066/800/667MHz, ECC, non ECC memory modules. http://www.gigabyte.com/products/product-page.aspx?pid=... and your RAM the best setting 1066 with tight timming CAS 4-4-4, but this need increase voltage 1.9v and need test stability use IBT (intelburn Test )
ChrisTeitge August 1, 2011 7:57:52 PM henydiah said:your mobo Support for DDR2 1200/1066/800/667MHz, ECC, non ECC memory modules. http://www.gigabyte.com/products/product-page.aspx?pid=... and your RAM the best setting 1066 with tight timming CAS 4-4-4, but this need increase voltage 1.9v and need test stability use IBT (intelburn Test ) Thanks for that ill give it ago....thanks again