Search
Sign in with
Sign up | Sign in

Fan noise in Xaser VI (Full tower case)

Last response: in Components
Share

I suddenly noticed, my xaser vi's top exhaust fan is making noise during boot up. It stays for 2 to 3 minutes then everything becomes normal. I checked the fan. No dust or other things that's causing this problem. I also checked system temperature.

No overheating at all.

Why this is happening?

My specs are:

C2D 9400
XFX 750i SLI
PSU 750W
Ram 4 GB 800 MHz

More about : fan noise xaser full tower case

Register or log in to remove
Power supply Authority

Good case (I have a V9), and if the case have warranty yet, return to your seller and apply for the warranty. Maybe the fan isn't adjust totally or have broken some blade.

In our country there is no warranty for PC Case :(  You said, it is not adjusted totally. Is it something from mobo or psu where it's not attached properly. As for broken blade, I checked but not found any damage of fan.

Where else can it be damaged or broken?

Some computers run the fans at full speed at boot to make sure there isn't residual heat which needs to be removed, on the better-safe-than-sorry principle.

Had you just updated the BIOS, or was it always doing that and you hadn't noticed before?
Related ressources
Ask the community
Power supply Authority

Andy2008 said:
The OP may have the case fans connected to the m/b and so controlled by the BIOS. Or maybe not.


-------------------------

Yes, some fans are connected to the mobo, BUT if yoo look for the XASER VI on internet, you can find that the fans must be connected to the PSU and not to the mobo.
Register or log in to remove
 
Ask the community
Read discussions in other Components categories
!