Sign in with
Sign up | Sign in
Your question

Cooler Master Hyper 212 thermal paste vs Arctic Silver 5...

  • Heatsinks
  • Cooler Master
  • Arctic
  • Thermal Compound
  • Silver
  • Overclocking
Last response: in Overclocking
August 24, 2011 11:39:10 PM

I have a CM Hyper 212+ with some stock thermal paste and a tube of Arctic Silver 5. With my 2500k due to arrive in a few days, I was wondering what the performance of CM paste is compared to AS5? I only ask since I heard AS5 needs to be reapplied every year or so, and I'd prefer not to have to do that...any thoughts?

More about : cooler master hyper 212 thermal paste arctic silver

a c 242 K Overclocking
August 25, 2011 6:46:11 AM

CM Hyper 212+ with some stock thermal paste is good no problem and may be just 1C -2C different use AS5
August 25, 2011 7:19:07 AM

Whoops. I used the AS5.

I have a tube of something something now... it aint arctic silver though... it promises great things. I am suspicious.
Related resources
August 25, 2011 7:37:57 AM

I only ask since I heard AS5 needs to be reapplied every year or so, and I'd prefer not to have to do that...any thoughts?

I used AS5 on a Scythe Ninja cooler and had it on my CPU without reapplying for 4 years at least. Never saw any changes in temperature (idle or load) whatsoever.
BTW, I used the stock paste on my Hyper 212+ for my recent upgrade, and it has been fine, just fine.
August 25, 2011 8:49:34 AM

It also has great features too.
a c 249 K Overclocking
August 25, 2011 9:53:24 AM

The compound that comes with the Cooler Master Hyper 212+ characteristically looks similar to any of the Top Performing aluminum oxides, it's thinner and easier to spread so it should perform very well.

However the tube I have has no labeled ingredients of what the composition actually is inside the tube so guessing it is an aluminum oxide may be seriously incorrect, it could simply be gray silicone but Cooler Master has enough faith in it's performance to include it with their product.

Artic Silver 5 was tested in the thermal roundup and still is a viable competitor but needs some cure in time to reach its maximum performance level.

The CMH212+ needs some specific attention to detail regarding filling the heat sink base grooves, I recommend using an old card similar to a credit card to spread/fill the gaps level across the base of the heat sink, as you don't want to leave air gaps.

Then proceed to mount the heat sink, but remember this:

Thermal compound's only purpose is to fill the imperfections between the heat sink base and the CPU's heat spreader, and you need no more than it takes to do that which is not much at all.

Too much thermal compound defeats it's purpose and can in some cases be so much it acts as an insulator instead of a conductor of the heat.

August 28, 2011 5:11:28 AM

Thanks for the help. I got the thing installed and am in the process of overclocking right now! Keeps my chip nice 'n chilly :p