"NO ANY DEVICE FOUND"

Are you trying to use your old windows installation? Do you get this message at the post screen?

I don't know what is post screen is, but the messege is before windows start. Like a computer trying to scan for device in my computer, but it can't find anythings.

If this is a newer model board you may have a controller or secondary controller set for raid/achi mode and it's looking for a device and simply reporting none found.

Here is my system:

Intel Core i5-750 Lynnfield 2.66GHz LGA 1156 95W Quad-Core Processor Model BX80605I5750

G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Triple Channel Kit Desktop Memory Model F3-10666CL9T-6GB

POWERCOLOR AX4850 512MD3-PH Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card

Western Digital Caviar Black WD5001AALS 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive

ASUS P7P55 LX LGA 1156 Intel P55 ATX Intel Motherboard

Sony Optiarc 24X DVD/CD Rewritable Drive Black SATA Model AD-7240S-0B


Thermaltake W0116RU 750W Complies with ATX 12V 2.2 & EPS 12V version SLI Ready CrossFire Certified 80 PLUS Certified Modular

After all the problem I have, I glad that it didn't blow up.

Here is what problem I have:

"NO ANY DEVICE EXISTING"

After install Windows 7 64 bit run good a hour and it turn blue screen and scanning my memmery and restart itself. After when it try to reboot I got a option to start in safe mode or normal, because windows say that it have problem with starting. I try both safe mode and normal and still can't fix it.

Please help

I got it, it was my temperture all along. The temp in Bios is goes from 95 to 104 less than 5 minute. After I got windows 7 and motherboard driver install it run as 86F and when I use running explore and try to install some thing, it ran up to 103 so far. I notice that one thing by running 36 bit is better for the core i5, but I want to run 64 bit. SO look like I have to upgrade my coooling system. Anyone got a good one in mind.

Well I'm glad you got it because I'm confused 103 degress F = 40 celsius which should be fine. If you mean it was running 95 to 103 celsius something is set wrong of the fan isn't working. Hope your alright

Well if you information is correct. That mean the temp is not my problem and my computer still turn itself off and I got a message from windows that it could restart. It give me a choice to restart in safe mode or normal mod. I try both, but it seem not to fix the problem.

So far here is my progress. I found out that temp for core I5 is 86F idle, so my temp is okay. I test all of my memory with the Asus build in the motherboard and that was ok too, but here what I stuck at. My windows 7 still crash. I already try verythings that I cold think of to fix. Untill I found this web sit www.ocbase.com it run a test on your computer. As I been told most of my problem would be a memory, so I put one memory out the time. The first and second one crash the window while I am running the test. As of right now my last one is holding on. Have yet to crash the windows.

My test came out without a error free, but I still can't get the computer to restart by itself.
My next attemp is to install a 32 bit on all the ram see if that would work, I don't want to, but whata hell.

Check your ram specs; then try rebooting with just one stick and go into the bios using an f key listed at the post screen, or press the "del" key. Try adjusting the ram voltage; 1.65 is the recommended max for Intel boards. The specs may be listed at newegg if they're not on the ram label.

The specs on the ram is 1.5 V. I only running 1 stick and got it to run for a while, but about a 3 hours later. When I trying to closed all the programs that was running and it just reboot itself over and over again. I am running out of idea. I contact the G.Skill about may be it is memory problem, but I have yet got anything back from them yet. I search the web site and I found out that is doesn't support the Asus P7P55 LX at all, but Asus motherboard does. So who right and who wrong? I'm stuck!!!!

All of this time I been wasting, I ran a memory test today and guess what I got? 1613555 error and counting.

I sent all or my memory to G.Skill and hope I can get it back soon. Right now I just try find out why my computer is not working. I think if my new memory is good. It could be my hard drive? I don;t know. Can anyone help.

I got a new memory to day, but when I try to install Windows 7 64 bit. It didn't finish install and wouldn't reboot. I have manualy put the reset button. After that it try to complete the install, crash before it got done. I remove the 3rd stick and try again, but it still doing the same thing. I even try to install Windows XP, but it crash before it got to install anythings in it. I don't know what else to please help.

I adjust my voltage in the RAM to it maxinum (1.6 ) and play around with bios setting. It running and stable for now.

After adjust the voltage on the cpu and ram thing seem to work fine, but for some reason my computer run at high temp (40 C) 104 F. The computer shut down after that. I reinstall the fan 3 time and still have the same problem.