**Extreme Cpu Cooler HELP**

Hello my Overclock Experts:

HELP ME GET A COOLER THAT PERFORMS JUST LIKE THE D14 OR BETTER IN THE 100$ RANGE.

I am building a gaming machine and i need some Suggestions on what CPU Cooler buy.

I Ordered the Corsair Vengeance Blue 16GB Kit and the ASRock P67 Extreme4 so far. I will be buying the Intel i5 2500k for gaming and im going to push it to at least 5ghz stable!

ASROCK P67 EXTREME4
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157229

CORSAIR VENGEANCE BLUE
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145347

I was going to buy the Noctua D14 but by the time i bought the RAM is was too late , these RAM are TALL and cant fit under the D14 unless u trim your Ram and i dont want that.

I Saw the Noctua C14 and the only way to fit this RAM under it is removing the FAN on the bottom of the Radiator, i want Maximun Performance without removing anything. If i do that it'll be something like this:

http://forum.corsair.com/forums/attachment.php?attachmentid=8167&d=1299548868 AND THAT LOOKS UGLY AS FAQ!
9 answers Last reply
More about extreme cooler help
  1. Can't you just move one fan to the other side? People really like the Hyper 212 is should keep you in the 50-60 degree range if you OC.
  2. The thing is that im a One Time Buyer, if i buy the 212 i know for sure that eventually ill have to buy another one to get a better performance.
  3. If you still have not purchased the Vengeance, buy
    the G.SKILL Ripjaws X Series 8GB in stead. Or if you
    could, return the vengeance and get G.Skill Ripjaws
    X instead.
    The G. Skill Ripjaws X will fit under the NH-D14.
  4. henydiah said:
    If you still have not purchased the Vengeance, buy
    the G.SKILL Ripjaws X Series 8GB in stead. Or if you
    could, return the vengeance and get G.Skill Ripjaws
    X instead.
    The G. Skill Ripjaws X will fit under the NH-D14.


    is on its way man, and theres no way i will return them cuz i dont live in usa, thatd be a whole lot of stuffs to do, i rather stay with them and get the best for my situation rite now man!
  5. I used Xigmatek coolers on some i5 750's that I built. For the first one I just raised the fan up a few MM to clear the tall ram. For the second one I put the fan on the other side of the cooler, pulling air through the cooler rather than pushing it. This one ran cooler than the one with the fan mounted as a pusher.

    For high performance coolers you need to check frostytech.com and see what they think is best.
  6. The Xigmatek Aegir SD128264 single fan heatsink might do the job nicely? For those who do not know, Corsair sells low profile Vengeance RAM also.

    http://www.frostytech.com/articleview.cfm?articleID=2572
  7. This will give you a plus over big air, and for your goal to get to 5ghz with a 2500K you'll need it, solves your RAM height problem and delivers better cooling than big air.

    http://www.frozencpu.com/products/12222/ex-wat-162/XSPC_Rasa_750_RS360_Universal_CPU_Triple_Radiator_Water_Cooling_Kit-_HOT.html?id=eENDHdQR
  8. 4Ryan6 said:
    This will give you a plus over big air, and for your goal to get to 5ghz with a 2500K you'll need it, solves your RAM height problem and delivers better cooling than big air.

    http://www.frozencpu.com/products/12222/ex-wat-162/XSPC_Rasa_750_RS360_Universal_CPU_Triple_Radiator_Water_Cooling_Kit-_HOT.html?id=eENDHdQR


    Hey man thas a nice cooler! But i wonder whats the temp of the Cpu with this? im really in to it, and does it need any special water? would be a Dasani ok with it?
  9. I run 100% steam distilled water and a Silver Kill Coil in the reservoir.
Ask a new question

Read More

Heatsinks Cooling RAM CPUs Overclocking Product