Is my memory running correctly?

[theworm1212]

I have a Gigabyte ep35-ds3l motherboard and I am running G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1000 (PC2 8000) - http://www.newegg.com/Product/Product.aspx?Item=N82E16820231145.

I was looking at cpuz (screen shot provided below)
(http://img10.imageshack.us/img10/5405/20090728cpuzmemory.jpg)

and it said my memory was running at pc2-6400?


Shouldn't be running at pc2-8000?

If so how can I fix it? Tried tweaking with the bios with no avail.

 

[hunter315]

Its currently running the SPD timings, you are going to need to manually set the timings and voltage in bios to get it up to the correct speed, however depending on the CPU you are using that may not be possible without OCing the FSB

 

[theworm1212]

don't know if you guys needed to see this tab so here it is: http://img190.imageshack.us/img190/5265/20090728cpuzmemory2.jpg

hunter315: Thanks for the info. When I looked at the timings and voltage in the bios they seemed to be at the manufactured specs ie 5-5-5-15 and 2.1V. What would I change? My processor is the e8400 which has a FSB of 1333mhz I believe.

I have overclocked before but have since restored it to factory settings due to no serious improvements, mostly due to my dated 8800gt.

 

[hunter315]

try to set the FSBRAM ratio at 4:6 that should bring it up to 500MHz, also the Trfc only needs to be 45 not 52

 

[theworm1212]

I don't see the setting for fsb to ram ratio.