Memory voltage is 1.65 and bios has as 1.5

Not sure If I got it right , in the Bios Dram says

voltage of the memory in the bios says 1.5 while the specs of the memory has at 1.65

OCZ Platinum 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model OCZ3P1333LV4GK -

Do I manually bring it up to 1.65 or leave it at 1.5

Mobo P7P55D 1156. tia
3 answers Last reply
More about memory voltage bios
  1. leave it at 1.5 if it is working properly you can save a couple cents on your energy bill
  2. If it works and passes memtest86+ at stock voltage, run it there.

    The mfr expects you to manually increase the 1.5v to 1.65v to achieve the spec. speed and latency timings.
  3. I have a similar BIOS is at 1.5 and my RAM at 1.7...I get a memory error beep when trying to boot, and tech support claims that fixing this in the BIOS will fix my problem...true?
Ask a new question

Read More

Memory BIOS Memory Voltage