Tom's Hardware > Forum > General Networking > General Gateways, Routers and Firewalls > How to configure BEFSR41 to be a hub

How to configure BEFSR41 to be a hub

Forum General Networking : General Gateways, Routers and Firewalls - How to configure BEFSR41 to be a hub

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

I have a BEFSR41 Ver2, and would like to incorp into my network, (Basicly use as a HUB / Switch) can anyone give me a rough idea as to how or what to set the setting to? I am computer savy and familiar with IP addressing.. But just not sure what the setting on the Router should be. Gateway/router, DHCP enabled, disabled. etc...

Add a reply

On the BEFSR41, turn off dhcp. Plug cable from other router into a normal lan port. Plug other computers into the remaining lan ports. Don't use the WAN port.

------------------------------ I ain't signing nothin
Reply to sturm

Ask the community Add a reply

Tom's Hardware > Forum > General Networking > General Gateways, Routers and Firewalls > How to configure BEFSR41 to be a hub

Go to:

Help |
Forum rules

There are 488 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.221 seconds

Focus On

How to configure BEFSR41 to be a hub

Forum General Networking : General Gateways, Routers and Firewalls - How to configure BEFSR41 to be a hub