Sign in with
Sign up | Sign in
Your question

BSOD issue with hal.dll

Tags:
  • Chipsets
  • Computer
  • Blue Screen
  • Overclocking
Last response: in Overclocking
Share
September 21, 2011 5:11:45 PM

Hey guys, i'm getting a issue with my computer. Ever since i opened up my computer, and tried out my card in the second pci-e slot to see if i could SLI it in the case i put the graphics card i was using in the second pci-e slot, then switched it to the first slot, nothing to major. But when i booted it up, it said NEW CPU installed set up in BIOS, my computer was overclocked but set it self back to default values, which was a little strange. But that's not the issue. Ever since i've tried that i've been getting a hal.dll BSOD 0124x which to my knowleadge is a hardware complaint or failure which is bizzare to me since it worked perfect before i opened it up.

The thing is, it only happens when playing games, or anything intense graphicaly or flash player ect. Which leads me to think something is wrong with the GPU or the overclock vaules in my BIOS have got the voltage wrong and messing with my system which could be a possiblilty, but i don't see why? It worked perfect before and i reset the bios bvack to default then maunally set the values to my overclock back to normal. Anyway. The BSOD code is.

0x00000124 00000000`00000000 fffffa80`060a6028 00000000`f2000000 00000000`00000005

hal.dll hal.dll+12a3b X64 ntoskrnl.exe+7cc40


Cheers for the feedback in advance.


Edit:

System Spec:

550w coolermaster PSU
I5 760 3.8 ghz
6gb RAM 1333 mhz. Kingston.
HD 6870.
ASUS Maximus GENE III. Mobo.

More about : bsod issue hal dll

a c 242 K Overclocking
September 22, 2011 2:59:48 AM

unplug power Ac from PSU , remove battery in mobo let 10 minutees , put it back .. try turn on system
m
0
l
September 22, 2011 6:56:37 AM

I tried it, still BSOD's every 20-40 mins during playing a game ect. I don't understand why it's doing it now, before i removed the card it worked fine, now it's unstable as hell.
m
0
l
Related resources
a c 242 K Overclocking
September 22, 2011 8:36:25 AM

you need uninstall driver VGA and sound if still BSOD install fresh OS
m
0
l
September 22, 2011 5:31:34 PM

I reinstalled drivers ect, and re-adjusted my OC to higer volts and it seems to be stable for now. Not sure what caused this. Strange...
m
0
l
a c 242 K Overclocking
September 22, 2011 5:58:12 PM

Swapped PSU, get better from good brand like corsair, antec , xfx or seasoni and other psu had good review from jonnuguru /hardwaresecreet/kitguru/

Actually Your psu is bad .. It's cooler master not good efficien maybe drop at voltage too much . That like oc error 0x00000000124 not enough vcore
m
0
l
September 22, 2011 10:05:55 PM

This error can have a number of causes such as incompatibility between the video and sound drivers, however in this case I suspect that you are having memory problems maybe caused by the overclock or the memory voltage set to low etc. Try running memtest86 overnight.
m
0
l
October 8, 2011 4:50:33 PM

i had a hal.dll bsod also --- oc'my 2500k to 4.5ghz with vid set to 1.36 ...then i lowered vid to 1.356 and forgot about it .....a week later started having bsod's then remembered the vid, reset it to 1.36 and all is stable again --- anyway not sure what your settings should be but i'd check the voltages.....
m
0
l
!