4850x2 crysis BIG PROB

hello, i just benched crysis, the results were: 4850X2 CF OFF = 17FPS AVG
4850X2 CF ON = 16FPS AVG

heh?? well i know thats not normal!!!! whats going on !! im on CCC 9.8 PLS HELP
17 answers Last reply
More about 4850x2 crysis prob
  1. TESTED EVERY GAME, RESULTS ALL SLIGHTLY HIGHER WITHOUT CFX + FLASHING TEXTURES IN SOME GAMES
  2. Depending on what resolution you're running at, that's about what your'e going to get with a 4850x2,
  3. something else is probably bottlenecking it like a cpu
  4. i play @ 1680x1050 and 1080p, my cpu is a QX6700 @ 3.8ghzn this makes no sense as iv seen this card perform past 280 standards in crysis @ 1080p and 1680x1050
  5. Did you turn antialiasing off? Often that uses enough Video RAM to cause problems.
  6. Give us your system spec. And what are your setting for crysis?
  7. System details please. :D
  8. Yes this is very wrong....sound like only one card is being utilised.

    I get around 17FPS on v.high @ 1920x1200 on very high with the setup SLI'd 8800's
  9. or maybe you are cranking up all the settings lol.... make sure u turn AA and AS filtering OFF - your card cannot handle either at that resolution.
  10. VERY HIGH AA OFF QX6 @ 3.8GZ 6GB BALISTIX 1066
  11. Quote:
    Hmmm...your profile says Q6600 at 4ghz....cough cough.....and now you say you have a QX6700 at 3.8ghz....cough cough....

    Q6600 was in my 9600gt rig witch has 2gb ram its a fujitsu scaleo p COUGH COUGH
  12. a guy from saphire told me to keep reinstalling and sweeping the drivers, and monitor performance, everything is GOOD now, thx 4 helping out :kaola: :bounce: :pt1cable:


    Q6600 = OLD RIG (9600gt) QX6700 = NEW RIG (4850x2)
  13. microterf said:
    Depending on what resolution you're running at, that's about what your'e going to get with a 4850x2,

    If you dont know what your talking about, it does not help to leave a comment based in ignorance.
  14. cobra5000 said:
    If you dont know what your talking about, it does not help to leave a comment based in ignorance.

    This quote was based on my using 4850s in Xfire. As with the Xfire off and on, I'm using trifire now, 4870x2+ 4870, and with that x2, you cannot disable it w/o disabling A.I. Without any settings known, or resolution, it is very possible to get 17fps or lower in crysis with a 4850x2. So no, the comment is based on ignorance (not IN ignorance)
  15. microterf said:
    This quote was based on my using 4850s in Xfire. As with the Xfire off and on, I'm using trifire now, 4870x2+ 4870, and with that x2, you cannot disable it w/o disabling A.I. Without any settings known, or resolution, it is very possible to get 17fps or lower in crysis with a 4850x2. So no, the comment is based on ignorance (not IN ignorance)
    Well, in or on, one of my rigs has a single 4850 and another has two 3870 toxic cards. They both run Crysis at higher frame rates. This is, clearly, a driver issue. Mr smartypants
  16. cobra5000 said:
    Well, in or on, one of my rigs has a single 4850 and another has two 3870 toxic cards. They both run Crysis at higher frame rates. This is, clearly, a driver issue. Mr smartypants


    Based on the information he gave us
    (
    hello, i just benched crysis, the results were: 4850X2 CF OFF = 17FPS AVG
    4850X2 CF ON = 16FPS AVG

    heh?? well i know thats not normal!!!! whats going on !! im on CCC 9.8 PLS HELP)


    I believe my response was accurate w/o knowing resolution/ or settings. As for your statement about you getting higher frame rates, We both know that you are not getting over 17fps with 1 4850 @1920*1200 with 4xAA and ultra high too.
Ask a new question

Read More

Graphics Cards Crysis Graphics