What Cpu is better for my motherboard P5N32-SLI PREMIUM
Intel Pentium Extreme Edition 965
Family Intel Pentium Extreme Edition
Model number 965
Frequency (MHz) 3733
Bus speed (MHz) 1066
Clock multiplier 14
1.48" x 1.48" (3.75 cm x 3.75 cm)
Socket Socket 775 (LGA775)
Manufacturing process 0.065 micron
376 million transistors
Data width 64 bit
Number of cores 2
Level 1 cache size 2 x 16 KB data caches
Level 2 cache size 2 x 2 MB 8-way associative cache
Features MMX Technology
SSE
SSE2
SSE3
Execute Disable bit
Hyper-Threading technology
Virtualization technology
Electrical/Thermal parameters
V core (V) ? 1.2 - 1.3375
Minimum/Maximum operating temperature (°C) ? 5 - 68.6 (775_VR_CONFIG_05B)
Minimum/Maximum power dissipation (W) ? 86.28
or
Intel Core 2 Extreme X6800
Frequency (MHz) 2933
Bus speed (MHz) 1066
Clock multiplier 11
Socket Socket 775 (LGA775)
Architecture / Microarchitecture
Processor core Conroe
291 million transistors
Data width 64 bit
Number of cores 2
Floating Point Unit Integrated
Level 1 cache size 2 x 32 KB instruction caches
2 x 32 KB data caches
Level 2 cache size shared 4 MB
Features MMX instruction set
SSE
SSE2
SSE3
Supplemental SSE3
EM64T technology ?
Virtualization Technology
Execute Disable Bit technology ?
Low power features Enhanced SpeedStep technology ?
Stop Grant state ?
Halt state
Extended Halt state
Electrical/Thermal parameters
V core (V) ? 0.85 - 1.5
Minimum/Maximum operating temperature (°C) ? 5 - 60.4
Minimum/Maximum power dissipation (W) ? 22 (Extended Halt mode) / 124.42
Thermal Design Power (W) ? 75
I don't think this board can run 45nm processors, i think I'm limited to 65nm ones. as far as I know. Has anyone run this CPU on this MB. Also my manual says that the FSB is 566/800/1066MHz
You think so.
The Extreme has a fsb of 1066 were as the e4400 only has 800, and the extreme has a Frequency of 3733mhz where the e4400 has only 2000mhz
Is not a higher number = faster?
Message edited by Its_Just_me on 11-07-2009 at 07:29:15 AM