Sign in with
Sign up | Sign in
Your question

Other's shows weird topic - is it my CPU?

Last response: in CPUs
Share
November 9, 2009 10:14:29 AM

Well, I went to the Others and saw a weird message. I don't know if it's my screen or graphics card. Maybe the APU on my CPU. So I thought I'd come here.

You can have a look here:
Link1

And then here:
Link2

Should I upgrade?

More about : shows weird topic cpu

November 9, 2009 10:46:20 AM

Pound to a pinch of BoM you got sold one of those commie boards running a Via CPU. Only good authentic Israeli USA CPU's made by Intel will have the power to render a page on Toms.
November 9, 2009 10:55:10 AM

Isn't there a German alternative?
Related resources
November 9, 2009 11:03:53 AM

Yes, but it would be a RISC.
November 9, 2009 11:07:33 AM

Really? That's bad - even with optimized coding on RISC, even a poorly optimized CISC CPU from pre 1970 can outrun it today.
November 9, 2009 11:16:59 AM

They would give an ARM and a leg for 1970's CISC performance, some bright SPARK might come up with something but I think they MIPS'd the boat a few years back.
a b U Graphics card
November 9, 2009 11:33:34 AM

I think they need to ram this thru, put them on their key boards at least, and for gfx, dont be so discrete about it
November 9, 2009 11:54:56 AM

Is AMD really that bad? I heard it can burn itself out...
November 9, 2009 1:11:56 PM

Faster that the heart of gold at the end of a disaster area performance.
a c 172 à CPUs
a b U Graphics card
November 9, 2009 2:17:55 PM

Darn. I never even knew we had an Old Man/Woman's Club. :( 
November 9, 2009 3:19:46 PM

We didn't. That was a tag that BoM came up with to try and stop confusion with us being called the 'Other'.
a b U Graphics card
November 9, 2009 3:44:40 PM

I see beyond windows
November 9, 2009 7:07:03 PM

Really? We thought you just licked them.
November 9, 2009 8:14:57 PM

Trying the old PSU impersonation again hey Strangest? He's not so stupid he wouldn't spot the difference between a 24 pin ATX connector and that poor excuse of a PWM fan connector you sport.
November 10, 2009 3:44:23 AM

Quote:
Vok, the problem you are facing is you are probably using an x86 based cpu, you need a powerpc, probably best buy an old mac. I mean seriously, look at the name of POWER pc.

Either that or buy a ps3, the cell in that is so advanced and so much more powerful that it is far too good to be wasted on windows.


I really hope that I can buy a CELL CPU for my PC. I've had a 486SX and some AMD Kettle Element - they both were slow. Can I get the CELL in PCIx slot in configuration?

Thank you guys. I always thought Anandtech was better, but Tom's has truly redeemed itself for me.
a b U Graphics card
November 10, 2009 3:58:53 AM

Well, when I lived in northern climes, I have to admit, I was stuck on windows for a time
November 10, 2009 4:11:11 AM

Quote:
As do so many that pass through these parts.

Perhaps vok needs to lick his power supply to lubricate the parts, that works with other things.


How do I do that? If I stick my tongue in there, I'm pretty sure the 40mm fan will cause some physical harm.
November 10, 2009 9:39:15 AM

Can i get shocked in this procedure?
a b U Graphics card
November 10, 2009 12:55:28 PM

Only if a pic of wingy comes before your eyes whilst doing so
November 11, 2009 4:09:59 AM

Well, I got 0.5Amp on my 9V rail. But it's split up into 5 rails (the 9V).

Say, while we on topic. If I daisy wire all my 9V rails onto the feed to my AMD eater CPU, will it run faster? I mean, it's 5x more volts for switching the mechanical relays.
a b U Graphics card
November 11, 2009 4:04:24 PM

I find welding the cpu directly to the mobo helps, and skipping the psu as well, just be verrrry careful, those wires are fat, if you file the ends, it helps
November 12, 2009 5:26:30 AM

Do you ARC weld or that old stick thingies? Aren't you afraid the smoke will pull into the fan ball bearings?
a b U Graphics card
November 12, 2009 5:41:51 AM

Naw, just use a vacuum cleaner while your doing it, and not a spec of dust will get in, nor a sparc.
Just hold your ARM steady while welding
November 12, 2009 6:21:53 AM

That's a bit rude. I don't have arms.
a b U Graphics card
November 12, 2009 6:42:01 AM

Then I suggest never attempting to do anything tongue in cheek
a b U Graphics card
November 12, 2009 6:42:31 AM

OK, well maybe not ANYTHING...
!