Hey guys, I had a question I've recently started to get into OCin to try to squeeze the juice finally out of my q6600 Rev G0 with Gigabyte ep43-ud3l.
I'm running on a Antec Basiq 550w PS and G. Skill 4gb DDR3 1600 Ripjaw but recently just ordered Corsair Vengence DDR3 1600 8gb for under $50 at newegg! So I'm hoping to take my OC further to maybe 3.4-3.6ghz. Everything is stable at 3.0ghz after running IBT and my memory is running at 1333mhz in Bios and current voltage is at 1.375v in CPU-z. My graphics card I have is a Radeon HD 5750 1gb.
So finally my question.....anytime I OC it up past 3.0ghz on the current setup sometimes it'll boot but crash blue screen once I hit windows 7. Anyone can help me out?
Comp just running World of warcraft.
After running IBT temps 5 times and playing World of warcraft for awhile.
I didn't know how to take a SS of CPU-z so I copy and pasted the specs from it here.
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q6600
Codename Kentsfield
Specification Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.F.B
Extended CPUID 6.F
Core Stepping G0
Technology 65 nm
Core Speed 2997.0 MHz
Multiplier x FSB 9.0 x 333.0 MHz
Rated Bus speed 1332.0 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
Max VID 1.313 V
Chipset
-------------------------------------------------------------------------
Northbridge Intel P45/P43 rev. A3
Southbridge Intel 82801JR (ICH10R) rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 666.0 MHz (1:2)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Row Refresh Cycle Time (tRFC) 74
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096
I'm new to this so I'd appreciate any help. Thanks!
I'm running on a Antec Basiq 550w PS and G. Skill 4gb DDR3 1600 Ripjaw but recently just ordered Corsair Vengence DDR3 1600 8gb for under $50 at newegg! So I'm hoping to take my OC further to maybe 3.4-3.6ghz. Everything is stable at 3.0ghz after running IBT and my memory is running at 1333mhz in Bios and current voltage is at 1.375v in CPU-z. My graphics card I have is a Radeon HD 5750 1gb.
So finally my question.....anytime I OC it up past 3.0ghz on the current setup sometimes it'll boot but crash blue screen once I hit windows 7. Anyone can help me out?
Comp just running World of warcraft.
After running IBT temps 5 times and playing World of warcraft for awhile.
I didn't know how to take a SS of CPU-z so I copy and pasted the specs from it here.
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q6600
Codename Kentsfield
Specification Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.F.B
Extended CPUID 6.F
Core Stepping G0
Technology 65 nm
Core Speed 2997.0 MHz
Multiplier x FSB 9.0 x 333.0 MHz
Rated Bus speed 1332.0 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
Max VID 1.313 V
Chipset
-------------------------------------------------------------------------
Northbridge Intel P45/P43 rev. A3
Southbridge Intel 82801JR (ICH10R) rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 666.0 MHz (1:2)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Row Refresh Cycle Time (tRFC) 74
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096
I'm new to this so I'd appreciate any help. Thanks!
Facebook
Twitter
Instagram