Coolermaster 330 Motherboard Risers- Where are they?

[Heaney]

On the Coolermaster 330, where are the motherboard risers and how to I install them?

 

[Motopsychojdn]

http://www.maplin.co.uk/motherboard-screwnut-standoff-x-50-37594
These things should be in your packaging somwhere, they screw into the Mobo bacplate on the case so as to line up with the holes in the motherboard, then you screw through those to secure it to the case
some cases have raised domes instead of standoffs, but refer to http://www.tomshardware.co.uk/forum/274745-13-step-step-guide-building for any niggles you run into
Moto

 

[Heaney]

Thank you very much.

I seem to have screws, and then a golden nut or bolt or whatever you call it....

Which goes on what side?

 

[Motopsychojdn]

The brass standoff screws into the motherboard tray, (find the I/o shield and installl that as well just before you put the motherboard in)
then the motherboard, and screw that in with the screws, follow that link I gave you, its step by step pretty much
Moto

 

[Heaney]

Thank you very much I got it

Tried turning it on and all fans spinning xD

 

[Motopsychojdn]

Great job enjoy your new build man
Moto