Jumper setting for connect both hard disk and dvd drive on single ide cable Tags: DVD Drives Connection Hard Drives Cable Jumper Storage Last response: June 16, 2011 5:11 AM in Storage Share chandni June 16, 2011 4:59:50 AM i connect both harddisk and dvdwriter on single ide cable but dvd drive is not detect More about : jumper setting connect hard disk dvd drive single ide cable bob100684 June 16, 2011 5:11:23 AM hdd master, dvd slave. Can't find your answer ? Ask ! Publish Related resources: ForumJumper Setting on Second Hard Disk ForumIde hard disk and ide dvd drive don't work at same time ForumIDE Hard Disk and DVD writer comes up as Not Installed in the BIOS ForumCan I use an IDE dvd drive with a SATA Hard drive ? ForumSet up ide jumper ForumJumper configuration for ide config. ForumOn Gigabyte EP45-UD3R, where to connect IDE hard drive ForumIDE DVD ROMs Jumper Settings ForumPdf jumper setting for hard disk ForumJumper setting for ide hdd with cdrom and sata ForumIDE hard disk not getting detected in bios ForumUsing both sata and ide hard drives simultaneously ForumHelp! Connecting a Hard Drive and DVD drive on Primary IDE channel? ForumBIOS won't detect IDE Hard Drive ForumBest SSD Of 2013, Which is it? ForumDisk read error on boot up ForumHard drive failing ForumConnect sata to esata ForumPC fell on side, Hard Drive OS is gone ForumThe device can not start(code 10) on my hard disk More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !