Flashed bios

I flahsed my bios on an motherboard from an HP beucase i wanted to overclock. now when i done it, nothing appers on the screen, My GPU (ati 4870) Lights up red. and when i turn of with the power button the HDDs and the PSU keeps running until i unplug the power. when i replug the power it turns on right away and does the same thing.. I really fucked it up :(. is it anyway to get the motherboard alive again? i mean nothing comes up on the screen. :/
6 answers Last reply
More about flashed bios
  1. Does your motherboard have integrated video? Are there any other video outputs on the computer? Plug your monitor into them and see if they are working.

    Otherwise, please list more of your system specs, especially motherboard.
  2. Try removing all RAM and the GPU and turn it on. You should hear the beeping noise for the missing RAM. if not, reset the CMOS, check your mobo manual on where to find the cmos jumper. Then do it again, turn on your mobo without anything including RAM and GPU (make sure though that the system speaker is in) if it doesn't make a beeping noise then your MOBO is busted.


    Ceasar Sabarre
    Computer Tech
    www.CESabarre.com
  3. Never flash a bios unless you NEED something that is in the new one, you don't currently have

    Was the computer fully built with a running os before you did the flash

    If so have you done ANYTHING else to the computer either prior to or after the flash

    Many new motherborads come with dual bios for just this case if you have it and how it works will depend on manufacturer. Consult your owners manual.
  4. Motharboard: HP nettle3 mcp61pm / GeForce 6150 SE / nForce 430
    Ram: 3GB PC6400 2x1GB + 2x512mb
    GPU: ATI 4870 1GB
    CPU: AMD Phenom 8400 Triple core. 2.1 GHz.
    PSU : 560W
    HDD:2x320GB
  5. ceasar said:
    Try removing all RAM and the GPU and turn it on. You should hear the beeping noise for the missing RAM. if not, reset the CMOS, check your mobo manual on where to find the cmos jumper. Then do it again, turn on your mobo without anything including RAM and GPU (make sure though that the system speaker is in) if it doesn't make a beeping noise then your MOBO is busted.


    Ceasar Sabarre
    Computer Tech
    www.CESabarre.com



    Im going to try that when im home. ill say what happens when i done it :)
  6. Where did you get the bios that you flashed?
Ask a new question

Read More

Chipsets BIOS Motherboards Power