Tom's Hardware > Forum > Graphic & Displays > ATI > Driver 4890 for windows server 2008

Driver 4890 for windows server 2008

Forum Graphic & Displays : ATI - Driver 4890 for windows server 2008

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Ivan Alexandrov   09-19-2009 at 10:04:38 AM

Hi all
I have a problem with installing ccc on windows server 2008 64bit
last week i get saphire 4890 card.
first i uninstall driver for my last nvidia 8600
Then i put new card in computer and try to install driver from original cd
somewhere in dialog just see the message "this program stop worked" with buttons debug and close program :pfff:
i tried this with all 64 bit drivers found in ati.amd.com but with same effect. :ouch:
if someone solved this problem, please tell me how?


Add a reply
Sponsored Links
Register or log in to remove.
renz496   09-19-2009 at 10:12:54 AM

try uninstall the ATI drivers and use the driver sweaper to clean any left over by nvidia and ATI drivers. then install the ATI driver once again

Reply to renz496
Ivan Alexandrov   09-19-2009 at 11:04:08 AM

I tried this but did not work
ati install manager is program that stop working
not sure but may be problem referencing dotnet. but is sure problem is in installation program, not in driver

Reply to Ivan Alexandrov
San Pedro   09-19-2009 at 03:31:06 PM

^
Try installing .net framework. May have to use .net 2 instead of 3 though.

Reply to San Pedro
Ivan Alexandrov   09-19-2009 at 03:38:19 PM

yes but don't know how to activate 2.0 trough 3.0
else windows server 2008 have both .net versions

Reply to Ivan Alexandrov
leon2006   09-20-2009 at 12:58:13 PM

Try to install the ATI drivers@ command prompt. This will allow you to install and bypass .net frame related installation issue. I have 4890 on one of my PC with visual studio 2008. Installation of ATI driver results to ATI-Install Manage stop working.

Log in as admin, open a command prompt look at the procedure below(Its reference on 9.6 driver install)


C:\ATI\Support\9-6_vista64_win7_64_dd_ccc_wdm_enu\Driver\Bin64

Uninstall ATI Software.... type the following:

atisetup.exe -Uninstall

The process or progress will be updated on your command prompt window.

When its finish reboot.

When you log in your computer will be using generic gpu driver.... The fonts will be large.

Log in as admin the open a command prompt

Go back to the same folder

C:\ATI\Support\9-6_vista64_win7_64_dd_ccc_wdm_enu\Driver\Bin64

to install type

atisetup.exe -Install - Output screen

The progress will be displayed in your screen (see walking dots...)

reboot.


To display other options at command prompt you can type.

atisetup.exe -? ... It will list down the options

I hope this helps.

Reply to leon2006
Ivan Alexandrov   09-21-2009 at 09:45:18 AM

Thanks very much my friend. :bounce:
Now i understand this problem is with visual studio, not with windows
ok, thanks again. now i will byte ccc

Reply to Ivan Alexandrov
Ask the community Add a reply
Tom's Hardware > Forum > Graphic & Displays > ATI > Driver 4890 for windows server 2008
Go to:

There are 755 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.607 seconds
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them