RAID 1 failure after drive replaced Tags: NAS / RAID Hard Drives Storage Last response: June 28, 2011 12:59 AM in Storage Share dyrnwyn June 27, 2011 10:16:05 PM Hey all. Had one of my RAID 1 drives fail the other day. Replaced it with a slightly newer hard drive of the same size, 1TB, and rebuilt the RAID. I then switched the new drive to Port 0 and the old drive to Port 1 on my Rampage III Mobo. Did this Friday. Today...my RAID is degraded and it appears the new drive has failed. It is on a different port and everything. Sound like drive problem, meaning I got a bad one, or something else. Thanks More about : raid failure drive replaced tokencode a b G Storage June 28, 2011 12:59:08 AM Why did you switch ports after the rebuild? I would not move ports after you have rebuilt the drive. m 0 l Can't find your answer ? Ask ! Publish Related resources Files on hard drive disappeared after RAID 1 failure Forum RAID 1 Drive Failure - Help on Replacing Drive Forum SolvedHow to replace dead RAID card after using one hard drive while waiting for replacement? (RAID-1) Forum SolvedReinstalling Win 7 after RAID0 disk failure, good drive not detected Forum SolvedRaid 1 2nd drive failure, more space? Forum SolvedRebuild RAID 1 Disk after Failure Forum RAID 1 Failure after Windows 7 Reinstall? Forum SolvedUpdated to Windows 8.1 after group policy errors. Disk Management now shows RAID 0 disk with only one drive. Forum RAID 0 / Hard Drive failure after first boot... Forum If one drive fails in RAID 1, does it HAVE to be replaced? Forum Rebuild a Raid 5 after single drive failure Forum Lost drive in raid 1 array, replaced, windows does not recognize Forum raid1 failure hal.dll error after bios reset Forum Help Diagnose RAID 1 Frequent Drive failure GA-P35-DS3P Forum Raid 1 failure but only old data left on remaining drive Forum Raid 1 failure but only old data left on remaining drive Forum Replace boot drive but still use raid 1 data drives Forum Solvedhow to transfer backup data from main HDD after boot drive failure to new boot drive Forum Solvedfreezing (before) after hard drive replaced Forum SolvedReplaced my dead hard drive, xp pro still wont start stuck on black screen F1 to start F 12 to setup, wont go any further! HEL Forum More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !