RAID Only to IDE mode? Tags: NAS / RAID Motherboards Sata Storage Last response: July 3, 2011 5:41 AM in Storage Share Akisonfire July 3, 2011 4:41:03 AM Hi,i have this motherboard,the MSI G31M3L-V2 and its a SATA motherboard and i have a SATA Hard Drive and Optical Drive (one) And the problem is when i go to the bios,In "Raid Mode" it only shows me IDE mode,why is that? Thanks! More about : raid ide mode | E-mail me updates | Report abuse Register or log in to remove Akisonfire July 3, 2011 5:41:02 AM So i realized that my Hard Drive has two Power supply entrances and only one is connected directly to the PSU. So i'm gonna ask,maybe thats why my Hard Driver can't start as an "Non-Raid device" ? | Report abuse Ask the community Publish Tom's Hardware>Forum>Storage>RAID Only to IDE mode?> Related ressources: ForumRAID or IDE Mode ForumSetting PCH SATA control mode = RAID (XHD) with only a single HDD ForumSATA mode was set for RAID , and only had one drive ForumHard drive only boots when AHCI or RAID mode is turned off ForumInstall Windows 7 in ACHI or IDE sata mode for SSD? ForumSwitching SATA from IDE mode to prepare a SSD install ForumASUS P4C-800 E Deluxe, switching from RAID 1 to non- RAID IDE ForumCan only boot in IDE mode after installing Windows 8 in AHCI mode ForumConverting a single hard drive with a RAID controller to IDE ForumWindows 7 with SATA hard disk - Setup in IDE mode HD is not recogised? ForumIDE/ACHI/RAID in BIOS config ForumBest SSD Of 2013, Which is it? More resources Read discussions in other Storage categories Hard Drives DVD Drives DVD Writers Optical Media Flash Media NAS/RAID SSD Western Digital !