M2A-VM HDMI wont post when manually set ldt to 800

[robgigs]

my question is this ive got my amd 64x2 4000+ overclocked to 2.45 ghz my fsb is set to 235 and my ram has been lowered to 667mhz the ram is pc2 6400, but when i try to set the LDT to 800 to lower the ht below 1000 it wont pos, at the moment it is stable at the above settings but my HT is at 1175 and my ram is running at 710 mhz, if anyone has one of these mobos any help would be great, i would like to see how high i can get my cpu to run but without beeing able to lower the ht to 1000 or lower im stuck were i am,plus i would like to get my ram near to the 800 mhz it should be running at, thanks for any help you can give me

 

[robgigs]

has no one got any ideas as to how to solve this problem?, cant believe im the only one who is suffering from this.

 

[robgigs]

still no solution to my problem,cant believe 277 people have looked at this and i havent got a single reply from anyone, well i guess i will have to stick atthis overclock.

 

[robgigs]

still no solution to my problem,cant believe 277 people have looked at this and i havent got a single reply from anyone, well i guess i will have to stick atthis overclock.

solved my problem, i purchased a new board and cpu