G

Guest

Guest
is Icute ATX 450W/P4 only for pentium 4?
i am having pc freezing problem now.
this is my rig.
Mainboard : Gigabyte VM900M
Chipset : VIA P4M900
Processor : Intel Core 2 Duo E7300 @ 2666 MHz
Physical Memory : 4096 MB (2 x 2048 DDR2-SDRAM )
Video Card : NVIDIA GeForce 8500 GT
Hard Disk : WDC (320 GB)
DVD-Rom Drive : SONY DVD-ROM DDU1642 ATA Device
CD-Rom Drive : HUAWEI Mass Storage USB Device
Monitor Type : Samsung SyncMaster - 17 inches
Network Card : VT82C570 MV IDE Controller VT6102 Rhine II Fast Ethernet Adapter
Operating System : Windows Vista (TM) Ultimate Professional 6.00.6001 Service Pack 1
DirectX : Version 10.00
Windows Performance Index : 4.8
PSU: Icute ATX 450W/P4

is my pc freezing problem caused by my psu?
 

blackwidow_rsa

Distinguished
Aug 16, 2007
846
0
18,990
I had a look at your motherboards cpu support list. It doesn't support 45nm Core2 CPUs, you will have to buy a new motherboard. A cheap Gigabyte G31 motherboard will do fine if you're on a budget. I have one in a spare system and it's a solid little board.
 
G

Guest

Guest
yeah, i noticed that too, but if u could, i would like to hear your opinion. my pc was ok before, it was built 2 years ago, the problem came 6 months ago.freezes!! my mobo does not support 45 nm but why it could ran well before?
 
G

Guest

Guest
yes i did it.but it still freezes randomly.i also replaced the ram, formatted to xp but nothing is changed. for your info, when i was replaced the cpu to the new one, at first, it was ok about 6 months.
 
G

Guest

Guest
yes. i have did it.it is ok for now, i switch my psu to my sister cpu, my pc for now is ok, but her pc is ok too..thats make me confuse. if the psu is degraded, why its run ok on my sister's pc?
 

yus_29

Distinguished
Dec 14, 2009
74
0
18,630

i didn't bcoz i was told its not too important. however, my cpu temp is 32 for idle and 55 at load