Latest drivers for Slipstream

[lmartinefc]

Hi all...come for some expert advice / links

I have downloaded nLite to produce a slipstream XP intall (from a retail SP3 original disk).

I have been looking round for drivers and found the following site (contains intel, nm10 and amd drivers).

http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/td-p/114120

So I now have a full set of Intel and AMD drivers. Only problem is, when I go to build the slipstream I can only select intel OR amd drivers. I get an error if I try to a multi file or single file load after I have loaded a single set.

I want to build a master disk - so need to know how to slipstream both sets of drivers.

NOTE : In this instance I am going to be installing WinXpPro SP3 on an 80gb Intel X25M - when trying straight from retail I get the 0x000 type error half way through install

Any help appreciated....

 

[lmartinefc]

I also found the following method :

http://www.tacktech.com/display.cfm?ttid=414

When unzipping the various files I get the following...

Intel_SATA_Driver.rar (ignoring .exe and .txt) :

1. txtsetup.oem
2. iaahci.cat
3. isator.cat
4. iaahci.inf
5. iastor.inf
6. iastor.sys

I also get the same files from the download 'iastor-sata-drivers.zip'

In a seperate file I get (iastor-sata-i386) :

1. iaAHCI.ca_
2. iaAHCI.in_
3. iaStor.ca_
4. iaStor.in_
5. iaStor.sy_
6. iastor.sys

And to complement this I also have the following AMD files :

1. ahcix86
2. ahcix86.cat
3. ahcix86.inf
4. ahcix86.sys
5. txtsetup.oem

Now....how to string all of this together (intel and amd) ?