Titan fenri fit with cooler master gladiator 600??

[maikona]

im very interested to get the Titan Fenrir on this case however im afraid it wont fit so anyone has a idea

the cpu dimension is Heatsink & Fan Dim: 156x124x107mm
while the case is (W) 202 x (H) 440 x (D) 485 mm

issue is that the motherboard and the cpu is few cm long so very uncertain if it will fit on my case

can anyone help me on this please

 

[AMW1011]

The Titan Fenrir will be 124mm high and the case is 202mm thick, this should work perfectly fine with about 80mm for the CPU and motherboard.

 

[maikona]

im relieved thanks for the answer

 

[AMW1011]

No problem, remember worse comes to worse you can always send it back for another.

 

[maikona]

hm came across to the right dimension meassure

107mm (W) x 124mm (D) x 156mm (H)
this for the titan fenri :S

 

[AMW1011]

Yeah I went by what FrozenCPU told me, your right.

It should still fit just fine, though it may be tight. I once had an Antec 900 which is 8.10" wide and your case is 7.9" wide. My cooler is 6.3" tall and yours is 6" tall. .8 of an inch is not very large, you should be fine. Again, if not then take it back.

 

[AMW1011]

For perspective, I know an Xigmatek HDT-s1283 fits into an Ultra Gladiator case which is 7.5", note that it actually touches the side panel, so you should have a good .7" of clearance.

 

[maikona]

ok thanks placing my order now