Sign in with
Sign up | Sign in
Your question
Closed

Coolermaster storm enforcer fans negative pressure

Last response: in Overclocking
Share
a b K Overclocking
January 10, 2012 10:21:22 AM

The ideal setup would be if the CFMs Intake and Exhaust are within 0% to 10% of each other.

Front, Side, Bottom - Intake
Top, Rear - Exhaust

If the Exhaust is grossly larger than the Intake, then there is the possibility of air by-pass from the smaller of the two exhaust fans (it will let more air in than exhaust).

In your instance, go ahead and try it. Install a fan control so that you can cut down the RPM if necessary.

Go with the best combination that will give you the lowest temps.
January 10, 2012 2:14:07 PM

thank you for reply
ill try it and see how it flows
Related resources
January 13, 2012 4:29:27 PM

this controller looks alright
is it
IXA-FCIN - One Channel Internal Fan Controller silen x
a b K Overclocking
January 13, 2012 4:36:31 PM

Yes, it will work fine to control one fan (it is single channel)
January 13, 2012 4:49:06 PM

silenx IXA-FCIN - One Channel Internal Fan Controller
a b K Overclocking
January 13, 2012 5:43:43 PM

automaton2 said:
silenx IXA-FCIN - One Channel Internal Fan Controller

Yes it will work fine to control one fan.
January 13, 2012 8:44:51 PM

Ubrales said:
Yes it will work fine to control one fan.


Thanks for your help I ordered the silenx
a b K Overclocking
January 13, 2012 9:10:34 PM

automaton2 said:
Thanks for your help I ordered the silenx

Great! Let us know how it works out.
March 16, 2012 12:35:35 AM

Ubrales said:
Great! Let us know how it works out.

The silenx fan controller is great it does not run hot like zalman I am very satisfied

Best solution

a b K Overclocking
March 16, 2012 12:42:22 AM
Share

Good to know!
March 26, 2012 3:39:32 PM

Best answer selected by automaton2.
a b K Overclocking
March 26, 2012 4:25:05 PM

Thank you!
a c 324 K Overclocking
March 27, 2012 7:35:50 PM

This topic has been closed by Rubix_1011
!