P6T - i7930 - OCZ 1600 2x3 low voltage - prime95 failures

[tek0011]

P6T
i7-930 stock cooler/fan
OCZ3G1600LV6GK
Win 7 64

Ok first and foremost I want to point out my first issue is that sometimes Bios only recognizes 4 gigs instead of 6.
Secondly Prime95 is failing on all but 2 threads, usually within a few minutes.

Here are my current memory settings. I am looking for any guidance on how I can get bios to show 6 gigs at all times, and how or why Prime95 is failing so badly. Memtest shows no issues.

DRAM: 1600
QPI/DRAM Core Volt: 1.65
DRAM Bus Volt: 1.65
CPU & PCIE: Disabled

Timings: 8-8-8-24
Ref Cycle Time: 88
Dram Time Mode: 2N

 

[EXT64]

Check the section on missing memory in this post (applies to all 1156/1366). Can also cause instability:

http://www.tomshardware.com/forum/272007-30-ignore-post-testing#t1885196

Also, try running your ram at the Intel Spec of 1066.